HDR-1000S 1TB tuner 2 signal keep dropping

(2 posts)

Sanchez_77

new member
Joined: Jan '16
Posts: 1
offline

I have a new box, fresh set-up and install, on initial set-up both cables/tuners were recognized and signal strength was almost 100% however i'm finding tuner two intermittently drops signal, it still says two cables are attached however it fails to record or wont show anything on the channel when selected. What's weird is the signal comes back from time-to-time...

I will test shortly to see if this happens when there isn't a program being recorded at the same time.

Any help or pointers would be appreciated.

Thanks

Sanch

| Sun 3 Jan 2016 22:29:50 #1 |
grahamlthompson

special member
Joined: Feb '11
Posts: 14,442
offline

Hi welcome to our forum. Check the f connector on tuner 2 in is not loose on the cable. You could try swapping the inputs to see if the issue is now on tuner 2.

| Mon 4 Jan 2016 10:43:22 #2 |

Reply

You must log in to post.