My Humax Forum

• Home
• LOGIN
• Register
• Search
on Amazon

My Humax Forum » Freesat HD » HB 1000S, 1100S

1. 

   collectors
   

   new member
   Joined: Apr '21
   Posts: 3

   offline

   Hi, cant seem to get my box to preconise a second cable. I have had my 1000s a couple of years but only running on one cable. So i got a new dish & 6 output LNB for future use. I have only run 2 coaxes from the dish to the free sat box & all looked good on signal 1 but nothing on signal 2. Then i remembered that 2 will only show when in use. So started recording BBC1 HD & IVT HD. This brought up the second signal, but it says only one sat cable connected, yet shows a signal, but no sign of good & a tick. I have swapped the cables over at both ends & still get only one cable connected. Could it be the HDR-1000S ??? Thanks for any help.

   

   | Tue 20 Apr 2021 9:14:58 #1 |
2. 

   REPASSAC
   

   special member
   Joined: Mar '11
   Posts: 4,100

   offline

   To recheck the feeds - firstly do a Freesat tune (or a reset to default).
   The number is remembers from the last of those done ONLY.

   | Tue 20 Apr 2021 10:10:11 #2 |
3. 

   collectors
   

   new member
   Joined: Apr '21
   Posts: 3

   offline

   Hi, i cannot find a retune area any ware, but got the reset. Will i loose recordings.

   | Tue 20 Apr 2021 12:09:01 #3 |
4. 

   REPASSAC
   

   special member
   Joined: Mar '11
   Posts: 4,100

   offline

   No but whatever you select you will loose recording schedule.
   A freesat tune is found in: Home > settings > right ? Freesat channels > search.

   Poor design, nobody sees the right with more through it.

   | Tue 20 Apr 2021 12:22:46 #4 |
5. 

   grahamlthompson
   

   special member
   Joined: Feb '11
   Posts: 14,442

   offline

   collectors - 7 mins ago  » 
   Hi, i cannot find a retune area any ware, but got the reset. Will i loose recordings.

   No only the recording schedule so photograph the schedule first.

   You cannot re-tune if box is recording or about to start a recording.

   Home settings Right 3 times to More and press OK if not recording you should fimd the Freesat tune option.

   | Tue 20 Apr 2021 12:24:44 #5 |
6. 

   collectors
   

   new member
   Joined: Apr '21
   Posts: 3

   offline

   Ah! well done guys. A system reset went off & found the second sat cable after i re-stripped the ends twice as the info i was getting off the 1000S was a bit misleading. But all working great now. Thanks:)

   | Tue 20 Apr 2021 16:29:59 #6 |
7. 

   grahamlthompson
   

   special member
   Joined: Feb '11
   Posts: 14,442

   offline

   collectors - 36 mins ago  » 
   Ah! well done guys. A system reset went off & found the second sat cable after i re-stripped the ends twice as the info i was getting off the 1000S was a bit misleading. But all working great now. Thanks:)

   Good news thanks for letting us know.

   | Tue 20 Apr 2021 17:06:57 #7 |

RSS feed for this topic

Reply

You must log in to post.