How to connect box to other units

My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T

How to connect box to other units

(12 posts)

blueman

member
Joined: Jan '17
Posts: 34
offline

Could someone tell me how to connect my Humax Box PVR 915T to the following units.
LG DR175 and a Toshiba 19BV500B
I had them all connected but my wife managed to unplug them whilst re-arranging the bedroom
Any help would be appreciated
Thankx

| Fri 15 Dec 2023 12:44:02 #1 |
jdlfreetime

special member
Joined: Dec '13
Posts: 372
offline

Hello blueman,

Welcome to the Humax forum. The LGDr175 is a dvd recorder & the Toshiba 19BV500B is a TV.

Depends what leads you were using. I assume hdmi cables? Connect Humax 9150 to hdmi input on rear of TV, aerial feed from Humax aerial output to TV (for loop through - TV tuner therefore works when Humax is in standby mode) Also connect aerial feed from aerial directly to Humax aerial input, not tv.

If you were using a scart lead to record off Humax then reconnect scart lead from Humax output to scart input to the dvd recorder scary input. If you have used hdmi instead of scart, then same thing. The dvd recorder connect hdmi directly to another input on rear of TV. Hope this all makes some sense/as mentioned, depends on your setup.

To watch equipment, select correct input on TV source select. If you still have queries, please ask. Kind regards, John L

P.s. next time it happens, get your wife to replug equipment, she wont do it again!

| Fri 15 Dec 2023 17:01:01 #2 |
DaveE

senior member
Joined: Feb '16
Posts: 93
offline

Don't think the 9150 has an hdmi output.

| Fri 15 Dec 2023 17:11:44 #3 |
jdlfreetime

special member
Joined: Dec '13
Posts: 372
offline

DaveE - 16 mins ago »
Don't think the 9150 has an hdmi output.

Hi DaveE,

Thank you for confirming.
My old Humax 9300 did, but hopefully blueman is on his way reconnecting setup. Might still use scart for recording to dvd recorder. John L

| Fri 15 Dec 2023 17:31:26 #4 |
DaveE

senior member
Joined: Feb '16
Posts: 93
offline

Cheers jdfreetime. I'm sure the 9150 only has a scart connection, like you say hope OP has got his connections back.

| Fri 15 Dec 2023 18:59:40 #5 |
jdlfreetime

special member
Joined: Dec '13
Posts: 372
offline

DaveE - 20 mins ago »
Cheers jdfreetime. I'm sure the 9150 only has a scart connection, like you say hope OP has got his connections back.

Long time since I used my 9300. Yes, hope DaveE solves nightmare in time for the weekend! Hope the wife is also reading this. "If you don't know what you are doing, leave alone!" Maybe a new year's resolution? John L

| Fri 15 Dec 2023 19:23:34 #6 |
blueman

member
Joined: Jan '17
Posts: 34
offline

Thanks for the replies have not started to try some of your solutions will try later.But yes the Humax Box does not have a
HDMI socket

| Sat 16 Dec 2023 9:27:33 #7 |
blueman

member
Joined: Jan '17
Posts: 34
offline

Ihave just connected the Humax Box to the recorder with a scart lead but cannot see a HDMI lead will go to my shed to get one as have plenty.One more question where do I plug the aerial lead

| Sat 16 Dec 2023 9:44:09 #8 |
Martin Liddle

special member
Joined: Feb '11
Posts: 4,685
offline

blueman - 20 mins ago »
One more question where do I plug the aerial lead

The socket on the back of the 9150T labelled "Antenna in".

| Sat 16 Dec 2023 10:08:00 #9 |
blueman

member
Joined: Jan '17
Posts: 34
offline

Well the Television works and so does the recorder just need to sort out the Humax Box

| Sat 16 Dec 2023 10:17:21 #10 |