Humax PVR-9300T not recording

My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T

Humax PVR-9300T not recording

(6 posts)

HappyGoth

new member
Joined: Aug '17
Posts: 2
offline

Two problems:

A) sometimes when switching on I get a plain yellow screen. To clear I have to restart the box,

B) the box sometimes won't record pre-set programmes.

Any advice gratefully received.

| Tue 15 Aug 2017 11:55:55 #1 |
Barry

senior admin
Joined: Feb '11
Posts: 11,052
offline

Welcome to our Forum

A. If connecting unit to TV with HDMI try switching off HDMI CEC on your TV.

(See This FAQ for different manufacturers names for this)

B. Are you sure you are only tuned to one transmitter?

(Channels listed in the 800 range is one indicator of this)

| Tue 15 Aug 2017 15:52:06 #2 |
HappyGoth

new member
Joined: Aug '17
Posts: 2
offline

Hi Barry

Thanks for your reply. I have checked the HDMI CEC setting on my TV and this is already switched off.

I do seem to be picking up programmes from 2 transmitters on this TV - one being Yorkshire/Lincolnshire and the other East Midlands. In the town I live in you can actually pick up programmes from 3 transmitters depending on whereabouts you live in the town and strength of signal. They are those two already mentioned before plus one being the West Midlands. Would deleting some of the channels help matters?

| Wed 16 Aug 2017 0:45:31 #3 |
Barry

senior admin
Joined: Feb '11
Posts: 11,052
offline

Try the manual tuning instructions - see this FAQ

| Wed 16 Aug 2017 5:58:19 #4 |
Martin Liddle

special member
Joined: Feb '11
Posts: 4,711
offline

HappyGoth - 6 hours ago »
Would deleting some of the channels help matters?

No. You need to do a manual retune to a single transmitter as Barry has suggested.

| Wed 16 Aug 2017 7:10:02 #5 |
Biggles

special member
Joined: Apr '11
Posts: 619
offline

Tune to the transmitter your aerial is pointing at, the compass bearing from your location for each available transmitter is listed on the DigitalUK web site.

| Wed 16 Aug 2017 8:04:19 #6 |