My Humax Forum » Freesat HD » FOXSAT HDR

Humax to Sky box

(2 posts)
  1. User has not uploaded an avatar

    FredPell

    new member
    Joined: Jan '16
    Posts: 1

    offline

    I have set up a Foxsat HDR with two inputs from the satellite dish to it giving me two channels.
    I would like to output to a Sky box and thought that the LNB output would let me do this but ge4t no signal when trying.
    Is there a setting that needs changing to allow the signal to go through?

    | Mon 4 Jan 2016 16:16:38 #1 |
  2. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Hi welcome to our forum. You can only use the rf output of the Foxsat-hdr to feed another satellite tuner under the following circumstances.

    1 Foxsat-hdr is in low power sby. This will make all channels available to tuner 1 of a Sky box (which should be set to single tuner mode).

    2 Foxsat-hdr is on, or recording, only channels in the same band and polarisation as the Foxsat-hdr tuner 1 is currently using.

    For information on which band and polarisation Freesat channels use see

    https://myhumax.org/forum/topic/what-can-i-record-and-watch-using-1-or-2-cables

    Note the Foxsat can view other channels while recording two anyway - also see above thread.

    | Mon 4 Jan 2016 17:37:38 #2 |

RSS feed for this topic

Reply

You must log in to post.