My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S

Installation freezes first screen

(1 post)
  1. User has not uploaded an avatar

    chris99

    new member
    Joined: May '16
    Posts: 1

    offline

    My HDR-1000s has worked fine for a long ime without problems. Recently 'on demand' stopped working. I noticed that software had recently updated to version 3.00.31. Decided to revert to 3.00.20. Update worked ok but 'on demand' still didn't work. Then I read that you should do a factory reset after a software update. I did this (seemed to take longer than usual) and now the installation freezes on the first screen (...'make sure you have connected your satellite dish with 2 cables'.....). I push ok on the remote and nothing happens. remote is definitely working ok and I have tried reloading the software, powering off for an hour or two, etc. but no difference.
    Any help gratefully appreciated as unit is now unusable.

    | Sat 14 May 2016 16:29:56 #1 |

RSS feed for this topic

Reply

You must log in to post.