My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S

issue recording on foxsat

(4 posts)
  1. User has not uploaded an avatar

    spade

    member
    Joined: Apr '13
    Posts: 11

    offline

    Hi all.
    I have a foxsat with the custom firmware installed.
    Because we have a panasonic freesat tv,it is hardly used.
    But the one thing that we always use it for is to record Holby City for my missus on BBC 1 HD.
    She would often watch 2 or 3 episodes together
    We are having two issues with the recording of holby.

    Firstly,it records fine for maybe 4 or 5 weeks and then stops recording it.
    Its still in the recording schedule.The programme is still on at the same time.
    This has happened a good few times.
    I then set up the recording again and it records again for a few weeks and then stops again.
    Second thing is that each time she watches a recorded episode,the audio description is on.You can turn it off of course as you are watching,but she does not know how.
    Because it is used so little,I can't get any idea whats happening.
    Any ideas please

    | Sat 28 Mar 2020 21:37:35 #1 |
  2. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Use customised channels to delete all but your local Nation HD channels.

    There appears to be bug in the Humax software that a change in the BBC CRID recording codes has exposed. This produces multiple recordings from one reservation.

    971 BBC 2 Wales HD
    972 BBC ONE HD (England)
    973 BBC 1 Scot HD
    978 BBC 1 NI HD

    | Sat 28 Mar 2020 21:59:02 #2 |
  3. User has not uploaded an avatar

    spade

    member
    Joined: Apr '13
    Posts: 11

    offline

    Thanks Graham,I will try that.thanks for the prompt reply.

    | Sun 29 Mar 2020 6:42:56 #3 |
  4. User has not uploaded an avatar

    dino

    special member
    Joined: Dec '11
    Posts: 197

    offline

    For the Audio Description setting on the Foxsat, press 'Menu', press 'OK' on settings then select 'Language' followed by 'OK' and there should be an option to enable/disable AD.

    | Mon 30 Mar 2020 15:01:19 #4 |

RSS feed for this topic

Reply

You must log in to post.