Hi all,this has just started happening on my three and a half year old HDR1000S recorder,when the machine first boots up the screen you normally get at first with part of the programme guide displayed is at the top left of the tv screen and is tiny.I find to clear this is to disconnect the power supply for a couple of minutes re boot and all is ok, I have done a factory reset but every couple of days the fault re occurs.Also when this fault is on if I press the recording button my list of recordings comes up on the screen but at the top left of the tv screen and is tiny as unable to read it, anyone else had this problem?
My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S
Menu screen tiny when HDR1000S first switched on.
(9 posts)-
| Thu 24 May 2018 19:51:14 #1 |
-
What setting do have for the box resolution output ?
If 1080i try 1080p and vice versa. This seems to be a TV issue rather than the box.
Is the TV capable of supporting 1080p50 output ?
A make and model would help.
| Thu 24 May 2018 20:34:38 #2 | -
Hi Graham,the TV is a LG 43LJ594V only 8 months old,I will try the different box output settings when I get home.Thanks for your attention.
| Thu 24 May 2018 22:33:34 #3 | -
Hi Graham have set the Humax to 1080p, sorry don,t know what you mean by the tv supporting 1080p50 out put. I have had the box three and a half years and the tv eight months and this problem has just started happening over the last two weeks or so.
| Fri 25 May 2018 16:12:19 #4 | -
DaveE - 12 minutes ago »
Hi Graham have set the Humax to 1080p, sorry don,t know what you mean by the tv supporting 1080p50 out put. I have had the box three and a half years and the tv eight months and this problem has just started happening over the last two weeks or so.An 8 month old TV will support 1080p50. Some earlier HD-Ready TV's could only use 1080i. 1080i is the native signal used by HD channels, If it works on 1080i and not 1080p then your TV will deinterlace to progressive anyway. Try cycling the box through the available output resolutions returning it to 1080p at the end when and if you see this. I had this once a long time ago, in my case shutting the box down and booting it up again fixed it.
| Fri 25 May 2018 16:30:58 #5 | -
Thanks for your reply, will give your suggestions a try, much appreciated.
| Fri 25 May 2018 19:40:55 #6 | -
Sorry to bump an old post. Dave E did you manage to resolve this issue? I have an LG 43" for a month or so with the same issues. I have tried all suggestions to no avail.Thanks
| Fri 21 Sep 2018 7:41:32 #7 | -
Hi POPPY, as Graham suggested I changed the settings on the Humax to 1080P from 1080I and it did the trick.However since last May when I posted this query it has happened once again but on putting the box into stand by and then booting up again it has been fine since. Sorry I can,t be of more help but maybe you could try as I did as per Graham.
| Fri 21 Sep 2018 19:57:29 #8 | -
Thank you.Will try it again.
| Sat 22 Sep 2018 17:24:47 #9 |
Reply
You must log in to post.
