My 1010S keeps missing the last minute or two of shows when recording despite the one-hour shows only running for 55 minutes.
Anything I can do about it?
My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S
Missing bits of recorded shows
(7 posts)-
| Fri 23 Aug 2013 8:25:50 #1 |
-
What channels are you referring to?
| Fri 23 Aug 2013 9:18:40 #2 | -
Two ways
1 set a manual repeating timer for the problem programme
2 set auto padding
| Fri 23 Aug 2013 9:27:23 #3 | -
Gonzo - as far as I remember it was 5USA.
Graham - Was unaware that I could - where do find out how. There is no Users' Manual these days. I've never heard of "auto padding".Thanks chaps.
| Fri 23 Aug 2013 9:32:44 #4 | -
Channel 5 are hopeless at sticking to the schedule and afaik the extra channels don't yet support Accurate Recording.
I use a manual timer for the few Channel 5 programmes I record.
Autopadding - applies to all recordings. It adjusts the start and end times from the scheduled times. It's advantage is that series recording is retained, disadvantage if the programme overruns by more than your end padding the good broadcasters using AR can't extend the recording time automatically
Settings Recording Start padding time, End padding time.
Manual recording
Recordings Planned Right Right
| Fri 23 Aug 2013 9:48:06 #5 | -
Graham,
Many thanks - I've changed the Auto Padding time & now we wait & see.
| Fri 23 Aug 2013 10:00:07 #6 | -
Top tip is on the days your recording from the likes of channel 5 then it's best to use Manual Padding, 2 mins before & 5 mins after seems to be the norm.
For all BBC, ITV & Ch4's sets of channels setting to Auto should record as expected.| Fri 23 Aug 2013 10:50:40 #7 |
Reply
You must log in to post.
