I have just bought a FVP-4000T and when trying to set up channels it doesn't find the HD channels (inc. Film 4+1). There doesn't seem to be an option to scan for them.
Firmware has been updated. Reset and scanned for Channels a few times, nothing seems to change.
I have looked at the manual scan options but the channel list only goes up to 69.
Anyone have any ideas?
Hi Welcome to our forum. You are confusing the UHF channel used by the MUX you are missing with the logical channel numbers allocated by the epg.
First info we need to identify the UHF channels used in your area is which transmitter you get your signals from.
Welcome to our Forum 
There is an issue with the auto tuning on latest software.
As Graham has stated post the transmitter you receive signals from.
Well thanks. I learned something today.
I had no clue as to what you were talking about so my friend google helped translate. Where I live 514000 was the magic number for a manual search
All stations now working.
Cheers
Hi guys, I'm new to all this but it's obviously good brain exercise. Am I in the right topic to ask how one forces the HD tuning channel from one region to replace what the autotune has found? I am in the notorious Wokingham area with both Hannington (H) and Crystal Palace (CP) transmitters. My strongest is CP and all other channels have tuned to this. For BBC B mux it has tuned to H (channel 39) rather than CP (ch 30) and seems to ignore any attempt to manually tune channel 30).
Welcome to our Forum
What signal strength and quality for Chan 30 do you receive?
You may have to manually tune your unit for all muxes from CP.
Hi Barry, on the TV I get 85 strength and 100 quality from 30.
39 on Humax is on/off and all over the place.
So, clear all tuning and manually tune CP? Do DVBT or DVBT2 make a difference here? I note that on Autotune it runs through all muxes twice.
Thanks, Fred
Apologises I am having internet drop out issues so can only get online now again at the moment.
Autotune does run through all muxes twice first for SD then HD.
I would manually tune all SD first (DVBT)
For CP this would be 22, 23, 25, 26, 28, 29 (local mux if you can receive it)
Then HD (DVBT2) 30, 33, 35
Hi, The original post says that the user is unable to get Film4 in HD. I was under the impression that this was not available. Am I wrong? If so, can anyone tell me what I need to do to get it.
Thanks
J_Oz - 10 minutes ago »
Hi, The original post says that the user is unable to get Film4 in HD. I was under the impression that this was not available. Am I wrong? If so, can anyone tell me what I need to do to get it.
Thanks
Whether or not you can get Film 4 in HD, depends on which transmitter you get your Freeview TV from. If you post this information someone will be able to help.
You must log in to post.
