Hi my old HDR1100S suddenly stopped working yesterday. I tried a couple of restarts and it tried to fire up then nothing. No signal to the TV and no lights. The HDD doesn't try and spin up either.
The unit still gets warm so it's not a power supply problem. I've popped the lid off and have a replacement 1TB HHD on the way which I'll fit later. Is there anything else I should try in the meantime?
My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S
My HDR1100S - No lights on and no boot
(5 posts)-
| Thu 29 Feb 2024 9:29:20 #1 |
-
Hi painterman,
Welcome to the forum. Make a cup of coffee! You are almost there hopefully.Does the pvr work ok without hard drive attached? If it does, then I would guess that the hard drive either has a fault preventing it booting correctly or something else going on.
If you have already purchased hard drive, it's very easy to fit & the Humax should work ok with it once fitted. You just go into the settings and format the drive. It's then ready for recording. John L
| Thu 29 Feb 2024 9:45:19 #2 | -
So, just fitted the HDD and still no signs of life. It's definitely getting power as the heatsink warms up (new thermal paste applied) but still no lights or sound of the drive starting. Not sure where to go next . Thank you for your help so far
| Thu 29 Feb 2024 12:55:51 #3 | -
BTW thank you for the warm welcome and no the pvr doesn't work with or without the drive.
| Thu 29 Feb 2024 12:57:06 #4 | -
Hi painterman,
If all else fails, try:
https://www.digirepairs.co.uk/product/humax-set-top-box-repair-booking/John L
| Thu 29 Feb 2024 13:35:09 #5 |
Reply
You must log in to post.
