My Humax Forum » Freeview HD » HDR FOX T2

No loop through

(3 posts)
  1. User has not uploaded an avatar

    bryfly

    new member
    Joined: Mar '14
    Posts: 2

    offline

    Just received a HDR Fox T2 today and found it will not loop through the channels, had 4 conversations with Humax support, they say it is not faulty. with Fox t2 switched on TV works fine ,80% strength and 95% quality, in standby I get no bbc stations and some itv on the TV, when box in standby the signal and quality drops to about 1% & 1% for bbc channels, itv channels it is about 1 % & 3%, I believe there is a fault with loop through, but because I receive some stations in standby they say it is my TV at fault, but I have a 9200, 9300 and a youview box that work fine on this TV. any suggestions?

    | Tue 4 Mar 2014 17:02:17 #1 |
  2. brian

    brian

    special member
    Joined: Mar '11
    Posts: 1,047

    offline

    I would suggest that you turn off power saving in standby, then your loop through should work OK.

    | Tue 4 Mar 2014 17:35:04 #2 |
  3. User has not uploaded an avatar

    bryfly

    new member
    Joined: Mar '14
    Posts: 2

    offline

    brian - 39 minutes ago  » 
    I would suggest that you turn off power saving in standby, then your loop through should work OK.

    Cheers....I had already done that, but humax made me go through it on my first call..

    | Tue 4 Mar 2014 18:15:49 #3 |

RSS feed for this topic

Reply

You must log in to post.