My Humax Forum » Freeview HD » FVP 4000T, 5000T

Not powering up when hot

(4 posts)
  1. User has not uploaded an avatar

    Jcbathgate

    new member
    Joined: Mar '16
    Posts: 2

    offline

    Hi I have just joined the forum I am sure there are a few people with the same problem about the box kicking up from standby when still hot I know all the tricks i.e. pull the power wait 5 mins power backup and will power up and also keep the power button down and it will sometimes power up
    I have contacted humax support many times they are always helpfull this time they tell me they have asked a few members to trial new software I was wondering if it is working it's sutch a same this is a great box badly let down with a silly glitch

    | Fri 1 Apr 2016 8:58:55 #1 |
  2. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,040

    offline

    Welcome to our Forum

    Have you tried turning off CEC on your TV see if that helps.

    (when you put unit into standby it takes approx 1 min 16 seconds to fully shut down)

    | Fri 1 Apr 2016 9:30:03 #2 |
  3. User has not uploaded an avatar

    Jcbathgate

    new member
    Joined: Mar '16
    Posts: 2

    offline

    Thanks for that I will switch off find see what happens I am aware the box does take a bit longer to boot up the hard drive

    | Sat 2 Apr 2016 8:48:38 #3 |
  4. User has not uploaded an avatar

    JohnH77

    special member
    Joined: Dec '15
    Posts: 510

    offline

    Be aware that the repeat on the remote control is very fast and operates on the POWER ON/OFF button.

    If you hold the button down a fraction too long, you switch the Humax ON ... and promptly switch it OFF.

    | Sat 2 Apr 2016 9:52:12 #4 |

RSS feed for this topic

Reply

You must log in to post.