My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S

On demand plus recording

(6 posts)
  1. User has not uploaded an avatar

    P30jmp

    junior member
    Joined: Feb '17
    Posts: 6

    offline

    Just switched from Sky...I was surprised that on my HDR1000s, if I'm recording something, I can't watch an on demand channel. Is this normal, or am I doing something wrong (wrong settings, software update needed perhaps?)

    | Tue 14 Feb 2017 21:14:44 #1 |
  2. black knight

    black knight

    special member
    Joined: Dec '14
    Posts: 100

    offline

    No, it's not normal, as I haven't had an issue watching On Demand stuff when recording.

    | Tue 14 Feb 2017 22:06:45 #2 |
  3. User has not uploaded an avatar

    Faust

    special member
    Joined: Jun '13
    Posts: 1,598

    offline

    P30jmp - 1 hour ago  » 
    Just switched from Sky...I was surprised that on my HDR1000s, if I'm recording something, I can't watch an on demand channel. Is this normal, or am I doing something wrong (wrong settings, software update needed perhaps?)

    I know this sounds like a daft question - you are connected to the Internet via an ethernet cable I suppose and the network connection is working?

    | Tue 14 Feb 2017 23:12:44 #3 |
  4. User has not uploaded an avatar

    damian

    special member
    Joined: Jan '12
    Posts: 597

    offline

    As far as I know, all the Humax's that offer on demand, even those going back 8 years or so allow on demand whilst recording.

    Out of interest, is on demand okay when not recording?
    Also are you using hdmi and/or scart to view?

    | Wed 15 Feb 2017 2:35:19 #4 |
  5. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    I watch On Demand regulary while recording two. On Demand does not need your tuners.

    | Wed 15 Feb 2017 8:42:23 #5 |
  6. User has not uploaded an avatar

    P30jmp

    junior member
    Joined: Feb '17
    Posts: 6

    offline

    Thanks for the replies. I did the software update currently available on the Humax website and that seems to have solved the problem.
    Hope this is useful for anyone with similar problems.

    | Wed 15 Feb 2017 10:26:13 #6 |

RSS feed for this topic

Reply

You must log in to post.