Yesterday I connected the PVR HDD to my PC and using Humaxrw (with the frontend program)I was able to see all the files. I was unable to download to the PC HDD due to lack of space. I re-installed the drive in the 9300T to try to delete some of the recordings and on powering on, I was asked if I wanted to format the drive. The PVR no longer recognises the drive. Humaxrw can't see the drive either. Does anyone know how or if I can recover the files as the wife is upset about several programs she hasn't watched yet.
My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T
Problems after using humaxrw
(8 posts)-
| Thu 28 Feb 2013 17:24:32 #1 |
-
I've tried running humaxdiag and humaxcheck but get the following messages:-
Permission denied (with humaxdiag)Writes to the Humax disk are disabled
Humax disk: Permission denied (with humaxcheck)Any ideas?
| Thu 28 Feb 2013 18:59:15 #2 | -
Treebeard - 2 hours ago »
I was asked if I wanted to format the drive.Presumably you said no?
Humaxrw can't see the drive either.
At a guess you have allowed Windows to overwrite the partition table on the Humax. Try
humaxcheck x: -p -w
where x is the correct drive number for the USB attached drive. You should then be able to use humaxrw to download the programs to a PC. As far as I know humaxrw will not correctly put the files back on the Humax 9300T (it will on a 9200T) so you will either have to watch them via the PC or burn them to DVD.
| Thu 28 Feb 2013 20:24:38 #3 | -
Thanks Martin, I'll give that a try later.
| Thu 28 Feb 2013 20:37:38 #4 | -
I tried that without success, does that mean the only option is to format the drive?
| Thu 28 Feb 2013 22:03:39 #5 | -
I've tried again running command prompt as administrator and I've managed to find 3 partitions and partition table has been updated.
| Thu 28 Feb 2013 23:01:21 #6 | -
My recordings are now being transferred to the PC, thank you for your help Martin.
| Thu 28 Feb 2013 23:26:01 #8 |
Reply
You must log in to post.
