My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T

PVR 9150T Manual update not working

(5 posts)
  1. User has not uploaded an avatar

    clemmie

    new member
    Joined: Oct '12
    Posts: 1

    offline

    Hi,
    I followed the instructions on Humax's and this website to do the software update when the update was on air. It came on air at 10am this morning (as far as I know), but the box will not update. It was left on standby overnight, with automatic updates turned on in the settings.

    I have turned the box off for 30 secs, done the default setting reset, and manually searched for the update. The box finds it, but when I click to start it, it keeps coming up with 'Error E-HW'. The instructions I followed on Humax's website were to get around this particular error, yet it did not work and there are no further instructions.

    Any help greatly appreciated!

    | Wed 10 Oct 2012 11:21:14 #1 |
  2. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,685

    offline

    You seem to have done the right things. What software and loader version is the Humax currently using; also what is the System ID? Do you have an aerial amplifier powered by the Humax?

    | Wed 10 Oct 2012 11:35:45 #2 |
  3. User has not uploaded an avatar

    Neil

    junior member
    Joined: Dec '11
    Posts: 5

    offline

    I'm having the same problem on my 9300T. I checked that the OTA update should be available from 1000 today.

    Since that time I've attempted several manual searches on Channel 45 (freq 666000) withthe tuner set to BBC1. I have 76% signal strength and 100% quality indicated but keep getting no software found.

    Also tried the other channels I use (Bucks and Berks area so I tune to (BBCA - Ch 45 / D3 & 4 - ch 42 / SDN - ch 39 / ARQ A - ch 44/ ARQ B - ch47) but nothing there either.

    I don't have an amplifier powered by the Humax.

    My current software is Rev 1.0 UPTTF 1.00.26 wand the update date is Jul 7 2011.

    Any idea what I'm not doing correctly?

    | Wed 31 Oct 2012 10:45:50 #3 |
  4. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,040

    offline

    My current software is Rev 1.0 UPTTF 1.00.26 wand the update date is Jul 7 2011.

    Neil - You already have the latest version.

    | Wed 31 Oct 2012 10:51:24 #4 |
  5. User has not uploaded an avatar

    Neil

    junior member
    Joined: Dec '11
    Posts: 5

    offline

    OK, many thanks for that - I was expecting 2012 date stamp. Very much a Humax basic user.

    | Thu 1 Nov 2012 11:09:18 #5 |

RSS feed for this topic

Reply

You must log in to post.