PVR-9200T TOTALLY UNRESPONSIVE

(2 posts)

David Hesp

new member
Joined: Jul '15
Posts: 1
offline

My Humax PVR-9200T will not respond to the remote or any of the controls on the front panel of the machine.
There is power to the machine and it appears to boot up normally, but then the display shows "DATING" plus the clock time!
At this time the tv screen shows Dating not compatible with device.
Has anyone any idea how to remedy this please?
Regards, David.

| Sun 26 Jul 2015 9:10:56 #1 |
Biggles

special member
Joined: Apr '11
Posts: 619
offline

Sounds like you were trying to look at one of the channels in the range 225 to 248 ish, these channels are not suitable for the 9200 and as you have found, lock it up. Switch off at the mains, wait a minute and switch back on. As soon as you can and very quickly change to say BBC1 and if you're quick enough the 9200 might switch to BBC1. If you can't get it to do this then switch off at the mains again and remove the aerial, after a minute switch back on and you should now at your leasure be able to switch to BBC1 (or any other channel not in the offending range), shut down to standby, switch off at the mains and reconnect the aerial. Once you've got the 9200 running again go to Edit Channels in the menu and delete all the channels in the range mentioned above so you don't acccidentally select one again.

Note: Strictly speaking you should remove the mains plug before disconnecting / reconnecting the aerial.

| Sun 26 Jul 2015 18:24:50 #2 |

Reply

You must log in to post.