My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T

PVR-9300T How to Use

(4 posts)
  1. User has not uploaded an avatar

    Hught

    new member
    Joined: Mar '22
    Posts: 1

    offline

    Hi - Parents have a Panasonic tv with remote and Humax 9300T with remote.
    Tv works fine but they have been unable to operate Humax for a couple of years (in their 80s).
    Humax remote works, can turn box on and off. Click menu on Humax remote and it appears on box screen but nothing shows on tv.
    Have hunted high and low for online manuals, help etc. but until landing here to no avail.
    Anybody out there who can advise or point me in the right direction?
    Cheers
    H

    | Tue 22 Mar 2022 11:48:04 #1 |
  2. Biggles

    Biggles

    special member
    Joined: Apr '11
    Posts: 614

    offline

    The manual is in the FAQ section but is not downloading for me, perhaps Barry could look into the problem.
    Have you selected the correct AV input on the TV, the input the 9300 is connected to?
    How is the 9300 connected to the TV?

    | Tue 22 Mar 2022 13:48:55 #2 |
  3. Biggles

    Biggles

    special member
    Joined: Apr '11
    Posts: 614

    offline

    There's a working link for the manual in the 4th post on this page.

    | Tue 22 Mar 2022 14:05:28 #3 |
  4. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,683

    offline

    Biggles - 3 hours ago  » 
    Have you selected the correct AV input on the TV, the input the 9300 is connected to?

    I agree with Biggles, your symptoms sound as if the TV is not looking at the correct port for the connection from the 9300T. If you tell us the make and model of TV and whether the 9300T is connected by HDMI cable or SCART we can probably give precise instructions.

    | Tue 22 Mar 2022 17:23:04 #4 |

RSS feed for this topic

Reply

You must log in to post.