My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T

pvr9300t stopped recording

(4 posts)
  1. User has not uploaded an avatar

    timc

    new member
    Joined: Dec '13
    Posts: 2

    offline

    unit does not record every recording schedule.I have made room on the hard drive by deleting old recordings(now only approx. 4 hours)I am confident there was no overlap. Any suggestions

    | Mon 2 Dec 2013 18:53:25 #1 |
  2. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,711

    offline

    timc - 4 minutes ago  » 
    unit does not record every recording schedule.I have made room on the hard drive by deleting old recordings(now only approx. 4 hours)I am confident there was no overlap. Any suggestions

    What software version? Is there a pattern to the failed recordings? There is a known problem with version 1.00.26 and consecutive recordings from the same channel. Is the box correctly tuned to a set of multiplexes from the same transmitter (channels above 800 would indicate that it might not be properly tuned)?

    | Mon 2 Dec 2013 19:00:12 #2 |
  3. User has not uploaded an avatar

    timc

    new member
    Joined: Dec '13
    Posts: 2

    offline

    software version is 1.00.26, set up for auto update and left on standby but does not seem to be updating(last date Aug 2011). Last problem was consecutive itv programs last Sunday on BBC1. I tried to manually update but says no update available. System id is3023.0000

    | Mon 2 Dec 2013 21:24:23 #3 |
  4. Biggles

    Biggles

    special member
    Joined: Apr '11
    Posts: 619

    offline

    timc - 1 day ago  » 
    software version is 1.00.26, set up for auto update and left on standby but does not seem to be updating(last date Aug 2011). Last problem was consecutive itv programs last Sunday on BBC1. I tried to manually update but says no update available. System id is3023.0000

    Software version 1.00.26 is the latest version. Software is only transmitted when a new version is made available by Humax and then repeated several times at a couple of month intervals until (hopefully) all machines are updated. It is unlikely that Humax will produce further updates for the 9XX0 machines.

    The consecutive recording problem only occurs when the 9150/9300 machines are recording from STANDBY and from the same channel.

    | Tue 3 Dec 2013 23:06:23 #4 |

RSS feed for this topic

Reply

You must log in to post.