When I program my PVR-9150T to record something with auto-tracking enabled, it tends to stop recording on the dot of the scheduled time. This means that if the programme runs over its time the end of the recording is cut off. This is common in the case of BBC programmes.Is there a fix for this which does not involve disabling the auto-tracking and series link functions?
My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T
Record program problem
(6 posts)-
| Sun 8 Jan 2012 12:54:47 #1 |
-
Grabbage - 42 minutes ago »
This means that if the programme runs over its time the end of the recording is cut off. This is common in the case of BBC programmes.Is there a fix for this which does not involve disabling the auto-tracking and series link functions?When a recording is cut short, are there other recordings taking place or scheduled to start?
| Sun 8 Jan 2012 13:38:01 #2 | -
Not always. Yesterday for example I recorded 4 consecutive half hour programmes on BBC2 and nothing else. Each episode finished at the scheduled time or just before (eg at 2159)and the next started two or three minutes later (eg at 2202). This resulted in losing the end of each progamme and a few moments at the beginning of the next. Frustrating!
| Sun 8 Jan 2012 14:43:52 #3 | -
Grabbage - 1 hour ago »
Not always. Yesterday for example I recorded 4 consecutive half hour programmes on BBC2 and nothing else. Each episode finished at the scheduled time or just before (eg at 2159)and the next started two or three minutes later (eg at 2202). This resulted in losing the end of each progamme and a few moments at the beginning of the next. Frustrating!What software version is your box using?
| Sun 8 Jan 2012 16:27:53 #4 | -
It's HPTTF 1.00.26
| Sun 8 Jan 2012 18:08:38 #5 | -
Grabbage - 25 minutes ago »
It's HPTTF 1.00.26OK. We have a 9200 and a FOX-HDR T2. The 9200 doesn't have a software version exactly comparable to 1.00.26 (but is usually very accurate at capturing the end of recordings). Perhaps someone else with a 9150/9300 running 1.00.26 can offer some advice.
| Sun 8 Jan 2012 18:36:44 #6 |
Reply
You must log in to post.