My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T

Recordings stop after 10 minutes

(1 post)
  1. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,636


    Someone over on DigitalSpy is claiming that on a 9150 with the 1.00.26 software recordings under certain circumstances recordings that have had the start or end time adjusted stop after 10 minutes. This is a quote from their post:

    "If I set one recording (which I normally do via the guide and then manually add a minute or two at either end) as 12:00 to 14:00, for example, and then a second to start at 12:30 and end at 13:00 followed by another recording (on any channel) to start at 13:00 and end at 13:30, I get recording error icons.

    Rec 1 (12:00-14:00) completes OK, i.e. no error icon & 2 hours long,
    Rec 2 (12:30-13:00) completes OK, i.e. no error icon & 2 hours long,
    Rec 3 (13:00-13:30) starts but fails after 10 minutes and 52 or 53 seconds(!) with a green error icon.
    The 10 minutes and 52/53 seconds seems pretty exact but it is repeatable."

    I don't have a 9150 so can't test. Is this a known problem?

    | Sat 26 Nov 2011 11:08:07 #1 |

RSS feed for this topic


You must log in to post.