My Humax Forum » Freeview HD » FVP 4000T, 5000T

Remote control TV control

(20 posts)
  1. User has not uploaded an avatar

    J_Oz

    special member
    Joined: Oct '15
    Posts: 193

    offline

    I've not been able to get the remote control to control my TV. I have been through all the codes for Sony. I have a KDL 46X3500.

    | Mon 16 Nov 2015 18:28:43 #1 |
  2. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Based on previous models, check carefully the codes you are using are relevant to a TV. It's very easy to find yourself in a long list using codes that aren't for a TV.

    | Mon 16 Nov 2015 21:29:03 #2 |
  3. User has not uploaded an avatar

    J_Oz

    special member
    Joined: Oct '15
    Posts: 193

    offline

    I've been using the codes from the manual. As far as I can tell the Sony ones are only listed for Tv

    | Mon 16 Nov 2015 21:34:42 #3 |
  4. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    J_Oz - 43 minutes ago  » 
    I've been using the codes from the manual. As far as I can tell the Sony ones are only listed for Tv

    Are the codes 3 or 4 digits ? Humax have used both depending on the remote supplied.

    http://www.humaxdigital.com/uk/rcucodelist.php

    There doesn#t seem to be a downloadable manual for this box yet (unless Barry knows of a link).

    You may be able to find a suitable code from the above link.

    | Mon 16 Nov 2015 22:22:16 #4 |
  5. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,040

    offline

    No manual publically released as yet.

    FVP remote uses 3 digit codes.

    | Mon 16 Nov 2015 23:38:36 #5 |
  6. User has not uploaded an avatar

    J_Oz

    special member
    Joined: Oct '15
    Posts: 193

    offline

    Is there any news on this?
    Am I right in thinking that after illuminating the 'TV' button, you enter the 3 digit code then press OK, then the tv should switch off?

    | Fri 27 Nov 2015 13:30:25 #6 |
  7. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    J_Oz - 4 minutes ago  » 
    Is there any news on this?
    Am I right in thinking that after illuminating the 'TV' button, you enter the 3 digit code then press OK, then the tv should switch off?

    Instructions here

    http://www.humaxdigital.com/rcu/rcucodelist_mdb1.3_gb.pdf

    | Fri 27 Nov 2015 13:34:50 #7 |
  8. User has not uploaded an avatar

    J_Oz

    special member
    Joined: Oct '15
    Posts: 193

    offline

    So I was right then.

    | Fri 27 Nov 2015 13:53:37 #8 |
  9. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    J_Oz - 5 minutes ago  » 
    So I was right then.

    Not enough information given to know whether you were right. No mention of TV being on and watching for power off, or how to continue to try other codes either.

    | Fri 27 Nov 2015 14:00:23 #9 |
  10. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,040

    offline

    J_Oz - 54 minutes ago  » 
    Is there any news on this?
    Am I right in thinking that after illuminating the 'TV' button, you enter the 3 digit code then press OK, then the tv should switch off?

    Correct...

    | Fri 27 Nov 2015 14:27:00 #10 |

RSS feed for this topic

12

Reply »

You must log in to post.