My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T

Remote RT-531B for PVR 9300T

(6 posts)
  1. User has not uploaded an avatar

    hilaryruth

    new member
    Joined: Sep '16
    Posts: 4

    offline

    The remote and box are no longer talking although individually they seem ok. Remote blinks when seen via a camera. How do I restore remote to default settings? I think somebody may have messed with it.

    | Mon 10 Oct 2016 14:11:49 #1 |
  2. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,035

    offline

    Try taking the batteries out, then press and hold ok and 0 (zero) for 30 seconds, replace batteries and see if unit responds to remote now.

    | Mon 10 Oct 2016 15:06:04 #2 |
  3. User has not uploaded an avatar

    hilaryruth

    new member
    Joined: Sep '16
    Posts: 4

    offline

    Hi. Thank you. So pleased. I have managed to get it to respond but a bit hesitant. It seems the box is ok so maybe the remote is suspect. Can I clean the keys in some way or do I need a new remote?

    | Mon 10 Oct 2016 15:40:38 #3 |
  4. User has not uploaded an avatar

    captgeneralmark

    member
    Joined: May '16
    Posts: 27

    offline

    Have you tried cleaning the front of the box? A quick wipe with a slightly damp cloth on the window over the ir receiver can work wonders as dirt, fingerprints, fly specks, etc can hinder the ir receiver.

    | Mon 10 Oct 2016 19:53:04 #4 |
  5. User has not uploaded an avatar

    hilaryruth

    new member
    Joined: Sep '16
    Posts: 4

    offline

    It didn't look dirty but I have cleaned it anyway. It all seems to be working again so thank you for your advice. I will keep an eye on it for a while.

    | Tue 11 Oct 2016 15:15:27 #5 |
  6. User has not uploaded an avatar

    AndyT

    member
    Joined: Feb '12
    Posts: 36

    offline

    That's exactly how my box started to go wrong.
    If it gets to the stage that the record menu disappears it could be a relatively cheap fix.

    | Fri 14 Oct 2016 21:19:45 #6 |

RSS feed for this topic

Reply

You must log in to post.