My Humax Forum » Freeview HD » HDR FOX T2

signal keeps going

(3 posts)
  1. User has not uploaded an avatar


    new member
    Joined: Mar '12
    Posts: 1


    HDR-FOX T2
    Was working ok & then signal suddenly went. Now it comes & goes intermittently. Any ideas?

    Mon 12 Mar 2012 18:37:55 #1 |
  2. athomson


    special member
    Joined: Jan '12
    Posts: 114


    Which transmitter are you getting a signal from? What area do you live in? You could be on the very edge of the area serviced by that transmitter. Have you checked all your cabeling, does the TV recieve freeview and if so does the same hapen there?


    Tue 13 Mar 2012 7:18:09 #2 |
  3. User has not uploaded an avatar


    new member
    Joined: Apr '12
    Posts: 2


    I live on the south coast and have had this problem as well. I got the humax, moved house and got a new aerial connected at roughly the same time so can't do any before and after comparisons. I must be getting the signal from Whitehawk.

    Anyway, the HD channels come and go for me. Usually they are there but sometimes it says that "there is nothing being broadcast or it is encrypted". If one go then they all go. The meter at the bottom of the channel info screen indicates no reception.

    Most annoying.

    Mon 2 Apr 2012 11:15:54 #3 |

RSS feed for this topic


You must log in to post.