My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S

Specifying single satellite input

(5 posts)
  1. User has not uploaded an avatar

    iantresman

    senior member
    Joined: Dec '13
    Posts: 61

    offline

    My TV allows a satellite input, so I've taken one from the Humax. But the Humax still thinks it has two inputs (even though one shows no signal). Can I tell the Humax there is only one feed?

    I've input a satellite feed into the TV as it supports the BBC iPlayer UHD broadcasts, but all the planned recordings on the Humax have stopped working, presumably because it expects the second input to be working

    | Sun 24 Jun 2018 20:24:01 #1 |
  2. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    Make sure your HDR-1xx0S has the connection and LNB1 and do either a freesat tune or factory reset.

    | Mon 25 Jun 2018 7:45:57 #2 |
  3. User has not uploaded an avatar

    iantresman

    senior member
    Joined: Dec '13
    Posts: 61

    offline

    Thanks for that. I can find Reset OK, but where do I find the option to re-tune?

    | Sat 30 Jun 2018 7:34:16 #3 |
  4. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Photograph your recording schedule first. Option is not available while recording or within 15 mins of a scheduled recording.

    Home - Settings - Press Right 3 times to more - scroll to Channel Search

    | Sat 30 Jun 2018 9:20:34 #4 |
  5. User has not uploaded an avatar

    iantresman

    senior member
    Joined: Dec '13
    Posts: 61

    offline

    That worked a treat, thank you. The Humax now recognises that I have only one feed, and a test recording now works. Thank you!

    | Sat 30 Jun 2018 10:08:23 #5 |

RSS feed for this topic

Reply

You must log in to post.