My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T

Transparent images

(3 posts)
  1. User has not uploaded an avatar

    allan1954

    junior member
    Joined: Sep '12
    Posts: 8

    offline

    Hi new 9300t when watching program's a see thru image continually scrolls across the pictures it says 03 and some writing below did retune just the same anybody else had this problem please or no a fix.

    | Mon 24 Sep 2012 20:28:46 #1 |
  2. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Are you using a scart cable, if so it's a common problem arising from using a poorly screened scart cable. Try a fully screened scart cable. The TV's tuner outputs the channel it's tuned to on the scart cable, crosstalk transfers the output to the input as a ghost image. It's possible to resolve the problem by removing the output pins from the scart plug at the TV end.

    | Mon 24 Sep 2012 20:41:26 #2 |
  3. User has not uploaded an avatar

    allan1954

    junior member
    Joined: Sep '12
    Posts: 8

    offline

    grahamlthompson - 7 minutes ago  » 
    Are you using a scart cable, if so it's a common problem arising from using a poorly screened scart cable. Try a fully screened scart cable. The TV's tuner outputs the channel it's tuned to on the scart cable, crosstalk transfers the output to the input as a ghost image. It's possible to resolve the problem by removing the output pins from the scart plug at the TV end.

    Thanks yes the scart that came with the box my area Tyne tees the last one for the freeview change over then get a better scart lead.

    | Mon 24 Sep 2012 20:51:14 #3 |

RSS feed for this topic

Reply

You must log in to post.