i have the hdr foxt2 and have a internet connection but when i go to the tv portal is says connected but nothing happens it is
staying on te tv station.error message comes up and ideas please
My Humax Forum » Freeview HD » HD FOX T2
tv portal
(33 posts)-
| Sat 14 Jul 2012 11:38:19 #1 |
-
Hi welcome to the forum.
I only have a HD FOX T2 but the UI is nearly the same.
Menu/Settings/System/Internet Setting does it say network connected ?
If not choose configure LAN and choose DHCP.
| Sat 14 Jul 2012 11:43:30 #2 | -
hi thanks for reply , yes it does say network connected
| Sat 14 Jul 2012 12:04:12 #3 | -
Can you see the HDR in Windows Explorer using the network option ?
My HD FOX T2 just worked when connected to my router.
| Sat 14 Jul 2012 12:18:18 #4 | -
please where do i find the network option?
| Sat 14 Jul 2012 12:25:46 #5 | -
xp and i am connecting through the plugs devolo and all lights are working, in case that makes a difference
| Sat 14 Jul 2012 12:43:52 #7 | -
http://compnetworking.about.com/od/windowsxpnetworking/ht/mapnetworkdrive.htm
If you have a laptop connect it to the homeplug by the hdr. Turn off the wireless connection. Can you still use the internet ?
| Sat 14 Jul 2012 13:05:44 #8 | -
hi sorry so long, i get a message on the laptop that there is an ip conflict address... not sure ?
| Sat 14 Jul 2012 13:17:53 #9 | -
Sounds like you have two items using the same ip address. Go back to the hdr network setup and choose the configure option. Make a note of all settings. Change the option to manual. Enter all the numbers you noted but change the last three digits of the IP address you first noted after the last dot to say 220. Check you have the connected message and try the portal again.
| Sat 14 Jul 2012 13:30:44 #10 |
Reply »
You must log in to post.