My Humax Forum » Freeview HD » HD FOX T2

Update Problem

(8 posts)
  1. User has not uploaded an avatar

    Spanner2

    member
    Joined: Dec '11
    Posts: 12

    offline

    Can anyone help !

    I purchased a HD-FOX-T2 from Currys one week before Christmas, I also purchased from Humax a Wi-Fi dongle.

    I cannot record onto a USB and I cannot connect to my network with the Humax Dongle. I have found that the unit was updated Feb 2010 (bit fed up with this when I bought it at the end of 2011)

    My Humax does not run the new update from my USB stick, I have followed the instructions to the word and tried two different USB sticks.

    Any ideas much welcome.

    | Sat 14 Jan 2012 19:10:08 #1 |
  2. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,683

    offline

    Spanner2 - 22 minutes ago  » 
    My Humax does not run the new update from my USB stick, I have followed the instructions to the word and tried two different USB sticks.

    The most common update problems are a) using the wrong update file (HDR instead of HD) b) not unzipping the file (if downloaded as a zipped file) c) not renaming the file correctly. I take it that none of those apply to you?

    | Sat 14 Jan 2012 19:34:21 #2 |
  3. User has not uploaded an avatar

    Spanner2

    member
    Joined: Dec '11
    Posts: 12

    offline

    Hello Martin, thanks for your reply

    The file name is (hd_fox_t2_upgrade.hdf)

    I have formatted the USB stick FAT32

    I think I'm unzipping the file correctly through windows (haven't bought winzip)

    Once I open and save the file to my desktop I drag & drop the file into my f drive USB not creating a folder.

    The only thin I have noticed that even though the download does not automatically run when the set is powered on,
    when I look at the file through the Humax set, it is showing a folder on the TV screen

    Attachments

    1. DSC00678_2.JPG (102.6 KB, 7 downloads) 12 years old
    | Sat 14 Jan 2012 20:32:24 #3 |
  4. User has not uploaded an avatar

    Spanner2

    member
    Joined: Dec '11
    Posts: 12

    offline


    | Sat 14 Jan 2012 20:48:22 #4 |
  5. User has not uploaded an avatar

    podman

    member
    Joined: Nov '11
    Posts: 39

    offline

    You need to have the USB pen plugged into to the rear USB socket and turn on the box as per instructions which i can't remember right now. Using the front usb socket doesn't work.

    | Sun 15 Jan 2012 0:44:25 #5 |
  6. User has not uploaded an avatar

    Spanner2

    member
    Joined: Dec '11
    Posts: 12

    offline

    Thanks for your replies, its almost 1.30 am and I have now sorted it. I changed my USB stick from 8G to 4G and reformated the stick through Windows7, this completly wipes the drive of old files.

    Still had a problem in running the update and it was a daft one, I was using the remote to switch the set back on to run the update, found out on another forum that you have to hold down the on/off button on the set.

    Now very impressed with the unit and especially with the TV Portal option.

    (Haven't got a USB port at the front, just to the rear of the set)

    | Sun 15 Jan 2012 1:25:36 #6 |
  7. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 11,040

    offline

    Welcome to our Forum Spanner2

    Glad to see that you have now sorted the problem.

    | Sun 15 Jan 2012 10:07:45 #7 |
  8. User has not uploaded an avatar

    Spanner2

    member
    Joined: Dec '11
    Posts: 12

    offline

    Barry - 5 hours ago  » 
    Welcome to our Forum Spanner2
    Glad to see that you have now sorted the problem.

    Thanks for your welcome Barry and a excellent site.

    Just need to try and see if I can network my Humax HD-FOX-T2 to play files off my PC.

    So I probably be back shortly, with more questions.

    Spanner2

    | Sun 15 Jan 2012 15:59:17 #8 |

RSS feed for this topic

Reply

You must log in to post.