My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S

Varying Sound Levels

(3 posts)
  1. User has not uploaded an avatar

    Alchad

    new member
    Joined: Aug '14
    Posts: 3

    offline

    Hi, new member, just installed a HDR 1000S whichI bought on EBay and it appears to be in good condition. It's connected to a 3 year old Sony TV via a HDMI cable. Signal strength and quality is good according to the settings menu. Everything seems to work fine except that on playing back recordings the sound quality is extremely variable and I need to constantly adjust the volume.

    Just wondered if this is a known problem, or is there anything I can do to correct? I've been through all the settings and can't see anything obvious to adjust.

    Also which controller should I use to adjust volume - the Humax remote, or the TV one?

    Any advice much appreciated,

    Alchad

    | Wed 27 Aug 2014 20:53:17 #1 |
  2. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Hi welcome to the forum.

    The problem is down to the way your TV handles Dolby Digital audio which the HD channels use.

    Try the following

    Settings - Picture and Sound - Digital Audio out
    Change the setting from Multi-channel to stereo

    Turn down the volume of your TV
    Turn up the box volume using the remote to maximum
    Turn up the TV volume to a normal listening level

    Use the TV volume to adjust the sound.

    If you do a factory reset remember to restore the box volume to max.

    | Thu 28 Aug 2014 9:16:26 #2 |
  3. User has not uploaded an avatar

    Alchad

    new member
    Joined: Aug '14
    Posts: 3

    offline

    Many thanks, that seems to have sorted the problem.

    Apologies for bad manners of not replying sooner.

    Regards

    | Fri 5 Sep 2014 7:51:03 #3 |

RSS feed for this topic

Reply

You must log in to post.