My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S

Watch a program and record another

(6 posts)
  1. User has not uploaded an avatar

    bob4mmi

    junior member
    Joined: Oct '13
    Posts: 6

    offline

    Hi,

    I have recently purchased the HDR1000S in order to get Freesat, but am becoming very frustrated with this machine.Despite what the user manual says - once a program is being recorded I seem unable to change over and watch another program. This appears only to happen if I try and hange programs once the program being recorded has commenced recording.

    Has any one else found this to be a problem or am I doing something wrong with the controller?

    Any help will be much appreciated - thank you

    Bob.

    | Tue 26 Nov 2013 20:33:20 #1 |
  2. User has not uploaded an avatar

    Donj

    senior member
    Joined: Oct '13
    Posts: 83

    offline

    Have you got a dual LNB feeding 2 cables to the unit...

    | Tue 26 Nov 2013 20:41:13 #2 |
  3. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Did you install the unit with only 1 cable and add the second later ? What does it say at the bottom of settings - System Information - Signal info ? freesat box connected with ? cable ? ( 1 or 2)

    | Tue 26 Nov 2013 20:50:51 #3 |
  4. User has not uploaded an avatar

    bob4mmi

    junior member
    Joined: Oct '13
    Posts: 6

    offline

    Thanks for super qick replies - Yes I have two cables from the dish which is brand new and professionally installed.
    I will have a look to see what it says at the bottom of settings.Many , Bob

    | Tue 26 Nov 2013 20:58:25 #4 |
  5. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    bob4mmi - 5 minutes ago  » 
    Thanks for super qick replies - Yes I have two cables from the dish which is brand new and professionally installed.
    I will have a look to see what it says at the bottom of settings.Many , Bob

    One good clue is start a recording now press the programme up or down button several times, even if the second cable is faulty you should be able see other channels. You can even record two as well try recording 108 and 109 at the same time.

    | Tue 26 Nov 2013 21:05:19 #5 |
  6. User has not uploaded an avatar

    bob4mmi

    junior member
    Joined: Oct '13
    Posts: 6

    offline

    Hi Graham,

    Have chechked the sttings and signal nfo confirms two cables in use.Will try your other suggestions when the wife has finished watching her program!Bob-

    Thanks again

    | Tue 26 Nov 2013 21:23:59 #6 |

RSS feed for this topic

Reply

You must log in to post.