My Humax Forum

• Home
• LOGIN
• Register
• Search
on Amazon

My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T

1. 

   bw78007
   

   member
   Joined: Oct '13
   Posts: 37

   offline

   Searched the web and this forum I have a friend with a 9200T and I can't find any software update any answers please

   | Tue 22 Oct 2013 11:26:33 #1 |
2. 

   -gonzo-
   

   special member
   Joined: Feb '13
   Posts: 660

   offline

   This model has been discontinued so will not get any further updates.
   What software version is it on?

   | Tue 22 Oct 2013 11:28:04 #2 |
3. 

   bw78007
   

   member
   Joined: Oct '13
   Posts: 37

   offline

   Not sure I will ask, I updated my 9150T and was very impressed with the results in conversation with a work mate he told me he had a 9200T which was locking up now and again I thought a simple update would deal with this looks like I was wrong

   | Tue 22 Oct 2013 11:34:34 #3 |
4. 

   -gonzo-
   

   special member
   Joined: Feb '13
   Posts: 660

   offline

   The last software update was May 2010 if that helps.

   | Tue 22 Oct 2013 11:40:00 #4 |
5. 

   bw78007
   

   member
   Joined: Oct '13
   Posts: 37

   offline

   Thanks I'm not working today I will give him a ring and ask him to check

   | Tue 22 Oct 2013 11:42:42 #5 |
6. 

   Martin Liddle
   

   special member
   Joined: Feb '11
   Posts: 4,711

   offline

   bw78007 - 9 minutes ago  » 
   in conversation with a work mate he told me he had a 9200T which was locking up now and again I thought a simple update would deal with this looks like I was wrong

   The latest version for the 9200T is 1.00.23; if he is using an earlier version then this version may help. Otherwise we need more information about the circumstances in which it locks up to diagnose the problem.

   | Tue 22 Oct 2013 11:46:28 #6 |
7. 

   bw78007
   

   member
   Joined: Oct '13
   Posts: 37

   offline

   Morning the software is may 2010 PGXTF 1.00.23
   the problem is when it goes to stand-by the clock time goes we have just four small lines no time the machine does not switch on and record when timed recording are set, it will record manually if the record button is pressed and a timed recording also works but only if left switched on once the machine is turned off it is off and no time displayed

   | Mon 28 Oct 2013 10:32:05 #7 |
8. 

   Martin Liddle
   

   special member
   Joined: Feb '11
   Posts: 4,711

   offline

   bw78007 - 28 minutes ago  » 
   the problem is when it goes to stand-by the clock time goes we have just four small lines no time

   The clock board needs cleaning which isn't particularly difficult see Link to DigitalSpy clock board thread

   | Mon 28 Oct 2013 11:02:34 #8 |
9. 

   Biggles
   

   special member
   Joined: Apr '11
   Posts: 619

   offline

   Just confirm you have --:-- in STANDBY and not ---- before doing anything but my guess is you've got --:--.

   You need to look at this thread but the link to JefUK's dismantling instructions on Hummy.org doesn't work so also look at this thread where it does work. Also look at my recent post #356 on the Digital Spy thread.

   Try doing a Default Setting to cure the lock-up problem, note it is unrelated to the clock problem.

   | Mon 28 Oct 2013 11:05:08 #9 |
10. 

    bw78007
    

    member
    Joined: Oct '13
    Posts: 37

    offline

    yep got --:-- I will give it a clean (hopefully) Is there anyway we can get the guide to load quicker

    | Mon 28 Oct 2013 11:28:01 #10 |

RSS feed for this topic

Reply »

You must log in to post.