planetvanda - 1 minute ago »
Decided to stay up a few more minutes & had another attempt. Followed your instructions and it's working !! Thank you so much Barry, you're a star
Good news 
Now go get some kip you have to be up early
My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T
Remote control has stopped working - unit failing to respond.
(371 posts)-
| Wed 14 Dec 2011 22:48:14 #91 |
-
I've power cycled my 9300T and gone from channel 26 to MENU. Other than that Zilch. cycling again gets me nowhere. Presume I'm going to have to leave it on all night in the hope it updates automatically?
Challenged :((| Wed 14 Dec 2011 22:54:42 #92 | -
challenged - 1 minute ago »
I've power cycled my 9300T and gone from channel 26 to MENU. Other than that Zilch. cycling again gets me nowhere. Presume I'm going to have to leave it on all night in the hope it updates automatically?
Challenged :((Make sure automatic updates are enabled and leave it in standby overnight tonight.
| Wed 14 Dec 2011 22:56:16 #93 | -
Welcome to the Forum challenged:-)
Once menu is displayed, can you not select other options ie
Installation (default password 0000)
Software Update etc| Wed 14 Dec 2011 22:56:42 #94 | -
Once menu is displayed, can you not select other options ie
Installation (default password 0000)
Software Update etcI can get into installation and put in 0000 but then it gets stuck again.
| Wed 14 Dec 2011 23:03:50 #95 | -
challenged - 1 minute ago »
Once menu is displayed, can you not select other options ie
Installation (default password 0000)
Software Update etcI can get into installation and put in 0000 but then it gets stuck again.
Use the switch on the back of the unit to power cycle it, and try again, once you have a picture press menu etc quickly.
I did not have a problem earlier when first investigating the issue.
| Wed 14 Dec 2011 23:07:03 #96 | -
Will do Barry and many thanks for your sterling service tonight in the face of much confusion. It's much appreciated :-))
| Wed 14 Dec 2011 23:08:16 #97 | -
challenged - 50 seconds ago »
Once menu is displayed, can you not select other options ie
Installation (default password 0000)
Software Update etcI can get into installation and put in 0000 but then it gets stuck again.
For how long? The update is transmitted continuously i.e. as soon as it the update has been transmitted, the transmission starts again from the beginning. The Humax can only commence the download when it detects the start of the transmission which can take several minutes during which the box appears to do nothing.
| Wed 14 Dec 2011 23:08:16 #98 | -
The Humax can only commence the download when it detects the start of the transmission which can take several minutes during which the box appears to do nothing.
It's been stuck at 0000 for 5 minutes now and a quick cycle lands me back at installation's 0000
| Wed 14 Dec 2011 23:13:33 #99 | -
Sorry I am having trouble understanding this one.
Once you have pressed OK on highlighting the installation menu you should be prompted for the password, after entering the default of 0000(four zeros) on pressing the fourth zero you should be presented with a new menu.
You should then be able to select the software update option.
Have not seen what you appear to be experiencing reported before, I don't know if any of our other members have?
| Wed 14 Dec 2011 23:28:38 #100 |
Reply »
You must log in to post.
