Trying manual tuning. The postcode search produces 26,29,23,43,46,40,31,37
I think about 2/3 of these found channels but most didn't return any. Is this because the aerial is pointing SW instead of NW to Bilsdale?
My Humax Forum » Freeview HD » FVP 4000T, 5000T
5000T set up
(27 posts)-
| Mon 11 Jun 2018 12:38:43 #11 |
-
For 23, 31, and 37 on Humax you need to set the 'transmission' on the manual tuning menu to DVB-T2. For the others the default of DVB-T is correct.
For 31 and 37 the signal is a lot weaker than the others and this may cause no channels to be found from those two frequencies if the aerial isn't set up ideally.
If you cannot tune to 31 and 37 successfully then to see which channels you are missing see channels with COM7 and COM8 against them on http://www.digitaluk.co.uk/channels/channel_listings
When viewing that site you can sort the list so that COM7 and COM8 channels are all grouped together by clicking on the column headed 'Mux'.woldsweather - 34 minutes ago »
I think about 2/3 of these found channels but most didn't return anyIs there a typo there? Your statement appears to contradict itself.
| Mon 11 Jun 2018 13:12:32 #12 | -
Luke - 48 minutes ago »
woldsweather - 34 minutes ago »
I think about 2/3 of these found channels but most didn't return anyIs there a typo there? Your statement appears to contradict itself.
I would guess the 2/3 means 2 or 3 multiplexes found channels; your suggestion about Transmission type sounds the most likely explanation.
| Mon 11 Jun 2018 14:02:35 #13 | -
Sorry yes 2 or 3 found channels.
So if the aerial is pointing SW do I need to turn it round to 296 degrees which is the direction of Bilsdale from here.
| Mon 11 Jun 2018 14:23:06 #14 | -
woldsweather - 35 minutes ago »
Sorry yes 2 or 3 found channels.Can you clarify whether you were setting transmission type correctly for each multiplex?
So if the aerial is pointing SW do I need to turn it round to 296 degrees which is the direction of Bilsdale from here.
Quite possibly. Which direction do your neighbours have their aerials pointing?
| Mon 11 Jun 2018 15:00:45 #15 | -
No re setting transmission type as didn't know how you knew which to set to what but it's been clarified so will do that when I finish in the garden.
Will check re neighbours aerials.
| Mon 11 Jun 2018 15:15:39 #16 | -
woldsweather - 1 hour ago »
No re setting transmission type as didn't know how you knew which to set to what but it's been clarified so will do that when I finish in the garden.When you do that please would you note down which ones do find channels and which ones don't find channels.
I suspect it will be 23, 26 and 29 which do find channels.
23 BBC B (DVB-T2) Signal strength 100KW
26 BBC A Signal strength 100KW
29 D3&4 Signal strength 100KW
31 COM7 (DVB-T2) Signal strength 18KW
37 COM8 (DVB-T2) Signal strength 18KW
40 ARQ B Signal strength 50KW
43 SDN Signal strength 50KW
46 ARQ A Signal strength 50KW| Mon 11 Jun 2018 17:01:36 #17 | -
Just tried again and nothing found at all on any channel.
| Mon 11 Jun 2018 17:13:22 #18 | -
The neighbours aerials are rotated 60 degrees from us to WNW (Bilsdale) whilst ours points SW (Emley Moor?) Question is - is it a case of rotating the aerial to the WNW or will it also require a new aerial?
| Mon 11 Jun 2018 17:26:53 #19 | -
So have been up and turned the aerial round to 296 degrees (Bilsdale). Did another automatic scan and it found 136 channels. Tries BBC 1 and get s stream without freezing now. Looked through the channels 3 times and I don't see any saying HD - should I?
| Tue 12 Jun 2018 10:44:53 #20 |
Reply »
You must log in to post.
