I have the HDR 1100S with latest software, connected to the two satellite cables that used to feed my Sky+ box. Both show good signal quality on the Settings menu. But I can't schedule two recordings for the same time and even if I only have one recording setup, when the time comes for it to start, if I am watching another channel, it puts an on screen message telling me I either have to change channel or cancel the recording. Have I missed a setting somewhere?
My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S
Can't record two shows at once.
(14 posts)-
| Fri 16 Sep 2016 22:52:54 #1 |
-
One or two cable operation is detected only on first install.
Make a note of your recording schedule, taking a picture is nice and quick, then perform a reset to default.Watch the TV screen carefully for a message on the number of cables detected.
| Sat 17 Sep 2016 5:35:57 #2 | -
Thanks, will that also wipe the recordings I have on the box, or just the schedule?
| Sat 17 Sep 2016 7:47:51 #3 | -
Welcome to our Forum
Just the schedule will be deleted and have to be re-entered.
| Sat 17 Sep 2016 8:02:35 #4 | -
Worked perfectly, thank you both.
| Sat 17 Sep 2016 15:17:22 #5 | -
I had this problem when I set it up in my bedroom to test it with one feed initially but when moved into my living room it only showed one feed so I had to reset to default and set up again and all worked perfectly for a few weeks now the same thing has happened when using the app from my workplace, only able to record one channel. Cannot wait to get home to check it out......
| Thu 22 Sep 2016 14:40:39 #6 | -
Seems my Humax box is working fine its the Freesat App that won't let me record 2 channels at once, any ideas out there please.... My app says " You can only record 1 program at once. Would you like to cancel one of the below?"
| Thu 22 Sep 2016 17:59:24 #7 | -
willie5094 - 46 minutes ago »
Seems my Humax box is working fine its the Freesat App that won't let me record 2 channels at once, any ideas out there please.... My app says " You can only record 1 program at once. Would you like to cancel one of the below?"Most users do not use the app due to the every 20 min boot and also the correlation to problems with the hard disk.
| Thu 22 Sep 2016 18:47:22 #8 | -
Surely that's the idea of the app to be able to remote record, what do you mean " due to the 20 min boot and also correlation to problems with the hard disk"
| Fri 23 Sep 2016 7:19:15 #9 | -
willie5094 - 17 minutes ago »
Surely that's the idea of the app to be able to remote record, what do you mean " due to the 20 min boot and also correlation to problems with the hard disk"When the app is paired the Humax will boot every 20 minutes to check with the freesat server to see if there is a new recording scheduled.
Several users have units which no longer see the hard-disk. A significant percentage of these, but not all, had the app paired. Now this may be just down to the increased wear that booting every 20 minutes must do.
| Fri 23 Sep 2016 7:41:05 #10 |
Reply »
You must log in to post.
