If I select Ch11 on my TV that's what I get. The Signal comes through the Hummy to the TV but if I try for the same channel through the Hummy it tells me the signal is too weak Since it's the same aerial I can't understand why. It is Sky Arts and the Hummy recognises it as such but tells me it can't receive it. Any thoughts?
My Humax Forum » Freeview HD » FVP 4000T, 5000T
Channel received by TV but not by Hummy
(21 posts)-
| Fri 29 Jan 2021 16:58:51 #1 |
-
guygrand - 5 mins ago »
If I select Ch11 on my TV that's what I get. The Signal comes through the Hummy to the TV but if I try for the same channel through the Hummy it tells me the signal is too weak Since it's the same aerial I can't understand why. It is Sky Arts and the Hummy recognises it as such but tells me it can't receive it. Any thoughts?If you tune to 19 Dave and bring up the signal test what does it say the signal strength and quality is ?
| Fri 29 Jan 2021 17:05:38 #2 | -
Tells me the signal is too weak to receive (but knows it’s Dave)
| Fri 29 Jan 2021 17:48:45 #3 | -
No 800s. Bluebell Hill is the transmitter. It is famously rubbish but I will try a manual retune. Many thanks.
| Fri 29 Jan 2021 18:42:03 #5 | -
You should need to retune UHF Channel 43 for Sky Arts on Bluebell Hill. That is ARQ-A. Try checking the quality reading on that channel first.
| Fri 29 Jan 2021 22:39:12 #6 | -
Have triad retuning manually but tv picks up the stations while gummy identifies them but says “sigma alpha too weak”. Amazing as the tv signal is fed through the humax. Thanks for all your help anyway.
Cheers chaps| Sat 30 Jan 2021 19:07:10 #7 | -
Here’s a thing. Just retuned again and everything now ok, just as I was about to send it back. Thanks for all your help but looks to me like some sort of intermittent fault. I noticed,doing a signal check in Settings, that the list says Tuner 1 100% but zeros for Tuners 2 and 3. Haven’t a clue what this signifies- has anyone?
| Thu 4 Feb 2021 16:22:09 #8 | -
The answer is in the FAQ's.
| Thu 4 Feb 2021 16:48:41 #9 | -
What faqs?
| Thu 4 Feb 2021 16:54:38 #10 |
Reply »
You must log in to post.
