Thank you will try all !
As said No cannot enter the Code as it does not let me get to that part!??
Cheers
My Humax Forum » Miscellaneous » Other Humax Products
HDR-7500T
(18 posts)-
| Tue 17 Nov 2020 22:39:12 #11 |
-
Improbable suggestion, but you could try starting a new installation with nothing plugged into the aerial socket on the box to see what happens then.
| Tue 17 Nov 2020 23:02:04 #12 | -
Well somethimg strange happened now!
I was just sitting and looking at the Box and on the Front Right hand side there are 4 small Buttons, Volume Plus and Vol Minus, then there is a -P1 and a +P1 now tapping one of the Buttons, suddenly the TV came alive , a Picute was showing, the message was there for a very short time and then it vanished!!! Very very Weird!
Anyway now could reset the Box again as there were many channels that i could not get and showed up as Weak Signals, so Re Scanned the Box and now Wallah! All seems to be back to normal! Holding Thumbs that it will now all be AOK!
Thank you s much though for all the suggestions, this is all so weird!!!!! Cheers Back to watching TV again! LOL| Tue 17 Nov 2020 23:10:50 #13 | -
Good news
Thank you for updating us.
| Wed 18 Nov 2020 6:00:26 #14 | -
I am now curious to know what those two small buttons are for?
Just has as said the +- PI have looked through the User Manual and cannot see anything about those,although they do show .
Cheers
| Wed 18 Nov 2020 8:30:37 #15 | -
They should change the channel being view, and/or page up and down in the guide.
| Wed 18 Nov 2020 8:54:51 #16 | -
Thanks Barry So its strange how pushing on one of them fixed the issue?? Will never know LOL
cHEERS| Wed 18 Nov 2020 19:45:16 #17 | -
I would check the presumably Belling lee connector used to connect the aerial very carefully. The design of these makes it very easy for a strand of screen to touch the centre core conductor.
| Thu 19 Nov 2020 9:39:33 #18 |
Reply
You must log in to post.
