Hello and can you help « My Humax Forum

My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S

Hello and can you help

(7 posts)

Mike G

member
Joined: Feb '13
Posts: 25
offline

Hi
My name is Mike and I live in SW France up until last week had used Sky Box to get English T.V. Then Changed to Humax FoxsatHD1000 1TB freesat +PVR. It worked ok for a week.Then remote and the few buttons on front of box ceased working.Only way to get it to work is to turn it off and on again at the mains.But this only works for a few minutes.I read some topics on the site and reset the box to factory settings and went through the re install set up, to no avail. I'm no techie so can anyone help. Thanks

Mike G

| Sat 9 Feb 2013 8:23:41 #1 |
Barry

senior admin
Joined: Feb '11
Posts: 11,051
offline

Welcome to the Forum

Can you confirm which freesat PVR you have, Foxsat HDR or HDR 1000S with freetime.

| Sat 9 Feb 2013 10:20:46 #2 |
Mike G

member
Joined: Feb '13
Posts: 25
offline

Hiya Barry

It Is The 1000S with freetime

| Sat 9 Feb 2013 11:25:49 #3 |
Barry

senior admin
Joined: Feb '11
Posts: 11,051
offline

Mike - you could try this from our FAQ's the next time it happens

http://myhumax.org/forum/topic/if-unit-appears-to-be-unresponsive-to-remote

rather then mains recycling, the bit in bold is important.

You could also try a HDD clean up which I know has helped one member - have not had any further feedback from them so no idea if it helped permanently.

Admin note - Moved to correct area.

| Sat 9 Feb 2013 11:43:20 #4 |
Mike G

member
Joined: Feb '13
Posts: 25
offline

hi again
Thanks for reply.I must be pretty thick but I don't understand where and how to type in 2538.

Mike G

| Sat 9 Feb 2013 11:51:28 #5 |
Barry

senior admin
Joined: Feb '11
Posts: 11,051
offline

Ignoring the fact that the unit appears unresponsive.

Just press 2580 on the remote keypad.

| Sat 9 Feb 2013 11:54:42 #6 |
Mike G

member
Joined: Feb '13
Posts: 25
offline

Hi

While I was waiting for reply the t.v. screen went dark and a box appeared saying that I should reformatt the hard drive,I managed to do this and the problem appears to have gone.

Thanks very much for your help

MikeG

| Sat 9 Feb 2013 12:14:38 #7 |