My Humax Forum » Freesat HD » FOXSAT HD

Humax Foxsat-HD manual tune

(34 posts)
  1. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Made an error Freesat Home transponder is around 11428 H. My Database has 11426 H 27500 2/3. Getting a new photo.

    Attachments

    1. Freesat-11426-H.jpg (114.9 KB, 0 downloads) 3 years old
    | Wed 7 Jul 2021 13:05:39 #31 |
  2. User has not uploaded an avatar

    philgreaves

    junior member
    Joined: Jul '21
    Posts: 5

    offline

    Hi thanks very much

    Before in non Freesat mode I had 85% strength and 100% quality

    However when I tune the transponder to 11426 etc as per your photo the strength is 0 and the quality is 0. Therefore I haven't progressed further with the tune.

    What does this mean??

    | Mon 19 Jul 2021 10:15:03 #32 |
  3. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    philgreaves - 9 hours ago  » 
    Hi thanks very much
    Before in non Freesat mode I had 85% strength and 100% quality
    However when I tune the transponder to 11426 etc as per your photo the strength is 0 and the quality is 0. Therefore I haven't progressed further with the tune.
    What does this mean??

    It means you have an issue with your dish or it's alignment.

    Or you have a lnb not suitable for Freesat (eg Sky-q wideband lnb)

    Or most likely you need a new quad lnb universal lnb.

    | Mon 19 Jul 2021 20:07:14 #33 |
  4. User has not uploaded an avatar

    philgreaves

    junior member
    Joined: Jul '21
    Posts: 5

    offline

    ahh interesting, well the dish hasnt moved since installation. However i think the system is quite old now. so i guess most likely it is the lnb which again is original and has always worked fine until now.

    Is there a preferred quad lnb for this system? brand or type etc or any compatibility issues i should be aware of? I have a mate with a ladder so i'm confident of being able to change it!

    thanks so much for the help.

    | Thu 5 Aug 2021 8:01:43 #34 |

RSS feed for this topic

Reply

You must log in to post.