Any help would be appreciated
My freesat box no longer works.I have fetched my 5000t out of retirement
My problem is the tv will not work unless the box is left on.
Tv Panasonic Oled Picture quality is very good,But if I turn the box off the tv will say no signal after five minutes
Please make replies simple I’m 84 years young
My Humax Forum » Freeview HD » FVP 4000T, 5000T
Need to leave 500t on to watch tv
(11 posts)-
| Thu 13 Apr 2023 7:43:07 #1 |
-
Try (on the 5000T):
“F” button
Settings
System Settings
Power Management
Power Saving Mode set to Off| Thu 13 Apr 2023 7:51:11 #2 | -
Thanks for your reply
I tried to turn it off when I press ok it will not turn off| Thu 13 Apr 2023 8:04:03 #3 | -
Strange. I can turn it on and off with no problem.
I take it you mean pressing OK after you move the blue selection from On to Off
| Thu 13 Apr 2023 8:49:29 #4 | -
Automatic power down turns on or off
Power saving mode press ok lights up on| Thu 13 Apr 2023 9:09:57 #5 | -
When Power Saving Mode lights up On, can you not move up to Off?
| Thu 13 Apr 2023 9:30:21 #6 | -
Yes I was doing it wrong went back in managed to do it your way
Tv now stays ON .Thank you so much for your time and patience
Yours George| Thu 13 Apr 2023 10:04:19 #7 | -
No problem, happy to have helped.
I am not far behind you at 79!
| Thu 13 Apr 2023 10:09:42 #8 | -
rexleroy - 4 hours ago »
Any help would be appreciated
My freesat box no longer works.I have fetched my 5000t out of retirement
My problem is the tv will not work unless the box is left on.
Tv Panasonic Oled Picture quality is very good,But if I turn the box off the tv will say no signal after five minutes
Please make replies simple I’m 84 years youngHello Rexleroy, welcome to the forum.
Assuming you have unplugged box (have you unplugged & tried this?) and still problems, maybe try a factory reset should fix problem & may save you time in long run to trace fault? But remember to note down your recording schedules as these are cleared + also take a note of App passwords. Recordings will still remain on hard drive. Hope you get it resolved. John L
| Thu 13 Apr 2023 11:51:39 #9 | -
jdlfreetime - 2 hours ago »
rexleroy - 4 hours ago »
Any help would be appreciated
My freesat box no longer works.I have fetched my 5000t out of retirement
My problem is the tv will not work unless the box is left on.
Tv Panasonic Oled Picture quality is very good,But if I turn the box off the tv will say no signal after five minutes
Please make replies simple I’m 84 years youngHello Rexleroy, welcome to the forum.
Assuming you have unplugged box (have you unplugged & tried this?) and still problems, maybe try a factory reset should fix problem & may save you time in long run to trace fault? But remember to note down your recording schedules as these are cleared + also take a note of App passwords. Recordings will still remain on hard drive. Hope you get it resolved. John LPresumably you are referring to the Freesat box as the issue with the 5000T has been resolved.
| Thu 13 Apr 2023 14:21:05 #10 |
Reply »
You must log in to post.