My Humax Forum

• Home
• LOGIN
• Register
• Search
on Amazon

My Humax Forum » Freesat HD » FOXSAT HDR

11. 

    daviescj
    

    junior member
    Joined: Jan '16
    Posts: 6

    offline

    Carried out a factory reset and everything is now working.

    SW 1.00.21
    LV U 7.54

    In Diagnostics Tuner 1 is now showing 100% in Signal and Strength, before the reset there were no readings. I have only 1 cable connected.

    | Mon 11 Jan 2016 11:35:46 #11 |
12. 

    REPASSAC
    

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    Make sure you have the loop from LNB1 OUT to LNB2 IN connected - the Foxsat will assume it is and report possible clashes accordingly.

    Snap Graham. Happy new year.

    | Mon 11 Jan 2016 11:41:05 #12 |
13. 

    grahamlthompson
    

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    daviescj - 3 minutes ago  » 
    Carried out a factory reset and everything is now working.
    SW 1.00.21
    LV U 7.54
    In Diagnostics Tuner 1 is now showing 100% in Signal and Strength, before the reset there were no readings. I have only 1 cable connected.

    To work properly you need a short piece of coax with a f connector on both ends. Connect tuner 1 out to tuner 2 in. Without this the box will let you make dual recording reservations that require the loop cable to be connected, these will fail when the box attempts to make the second recording unless both happen to be from the same transponder.

    See

    https://myhumax.org/forum/topic/what-can-i-record-and-watch-using-1-or-2-cables

    | Mon 11 Jan 2016 11:41:24 #13 |
14. 

    daviescj
    

    junior member
    Joined: Jan '16
    Posts: 6

    offline

    Thank you for all your help.

    | Mon 11 Jan 2016 11:56:38 #14 |

RSS feed for this topic

Reply

You must log in to post.