My Humax Forum » Freesat HD » FOXSAT HDR

Recording failures

(75 posts)
  1. User has not uploaded an avatar

    RobJF

    member
    Joined: Apr '14
    Posts: 43

    offline

    Recently my Foxsat has been failing on most but not all scheduled recordings.

    In Media it shows as 0m with the channel number instead of name and the broken symbol at the end. On clicking I get "Recording has failed. Unknown reason."

    It's possible this is only happening in Standby, not sure about that. When it should be recording the display lights up and shows the time but not the recording symbol. However, if I switch on, it then starts recording.

    I've tried checking the drive (including SMART from a PC) which is fine, factory settings reset and reinstalling firmware but no joy. I have the raydon custom firmware but haven't managed to uninstall it, I can't see the official version on the Humax site (newer models only).

    Any ideas?

    | Thu 27 Sep 2018 10:53:34 #1 |
  2. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Connect to the Foxsat using FTP and look at the video folder. Where xxx.ts is the name of a recording what is the file size of xxx.ts, xxx.hmt xxx.nts

    Does live pause work ?

    | Thu 27 Sep 2018 11:39:24 #2 |
  3. User has not uploaded an avatar

    RobJF

    member
    Joined: Apr '14
    Posts: 43

    offline

    Thanks but now I can't get in! Telnetted earlier and deleted the folder according to instructions to uninstall custom f/w. Didn't realise the update file I had was custom not official. So uninstall failed and custom message still appears during boot. But now I can't connect using telnet, ftp or samba (don't remember but assuming it's samba, using Windows File Explorer).

    FTP gets "ECONNREFUSED - Connection refused by server".

    PS I've rebooted -- well from standby -- several times, rechecking IP addr.

    | Thu 27 Sep 2018 12:14:23 #3 |
  4. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

  5. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    Can you connect via http to the Foxsat's IP address?

    If you did delete the install folder then on the next reboot the custom firmware would recreate the folder and install ONLY the basic interface. The full interface can be installed via http to the foxsat ip address.

    Can we confirm that you leave the Foxsat in standby overnight?

    | Thu 27 Sep 2018 12:27:44 #5 |
  6. User has not uploaded an avatar

    RobJF

    member
    Joined: Apr '14
    Posts: 43

    offline

    OK thanks that would explain it. Have to go out now but will try http etc later. Yes it's in standby overnight.

    | Thu 27 Sep 2018 12:40:22 #6 |
  7. User has not uploaded an avatar

    RobJF

    member
    Joined: Apr '14
    Posts: 43

    offline

    grahamlthompson - 6 hours ago  » 
    Connect to the Foxsat using FTP and look at the video folder. Where xxx.ts is the name of a recording what is the file size of xxx.ts, xxx.hmt xxx.nts
    Does live pause work ?

    In the failed cases there's only a .hmt file which is 2kb.

    Here are the details for a recording that failed to start on time but did start when I switched the box on:
    -rw-r--r-- 1 root root 4788 Sep 27 12:16 BBC Newsroom Live_2018
    0927_1113.hmt
    -rw-r--r-- 1 root root 2740544 Sep 27 11:39 BBC Newsroom Live_2018
    0927_1113.nts
    -rw-r--r-- 1 root root 950595584 Sep 27 11:39 BBC Newsroom Live_2018
    0927_1113.ts

    And for an entirely successful recent recording:
    -rw-r--r-- 1 root root 5673 Sep 26 03:03 The Flu That Killed 50
    Million_20180925_2137.hmt
    -rw-r--r-- 1 root root 2410816 Sep 25 22:01 The Flu That Killed 50
    Million_20180925_2137.nts
    -rw-r--r-- 1 root root 882100608 Sep 25 22:01 The Flu That Killed 50
    Million_20180925_2137.ts

    Live pause does work.

    | Thu 27 Sep 2018 18:46:18 #7 |
  8. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    RobJF - 1 hour ago  » 

    grahamlthompson - 6 hours ago  » 
    Connect to the Foxsat using FTP and look at the video folder. Where xxx.ts is the name of a recording what is the file size of xxx.ts, xxx.hmt xxx.nts
    Does live pause work ?

    In the failed cases there's only a .hmt file which is 2kb.
    Here are the details for a recording that failed to start on time but did start when I switched the box on:

    -rw-r--r-- 1 root root 4788 Sep 27 12:16 BBC Newsroom Live_2018
    0927_1113.hmt
    -rw-r--r-- 1 root root 2740544 Sep 27 11:39 BBC Newsroom Live_2018

    0927_1113.nts
    -rw-r--r-- 1 root root 950595584 Sep 27 11:39 BBC Newsroom Live_2018
    0927_1113.ts

    And for an entirely successful recent recording:
    -rw-r--r-- 1 root root 5673 Sep 26 03:03 The Flu That Killed 50
    Million_20180925_2137.hmt
    -rw-r--r-- 1 root root 2410816 Sep 25 22:01 The Flu That Killed 50
    Million_20180925_2137.nts
    -rw-r--r-- 1 root root 882100608 Sep 25 22:01 The Flu That Killed 50
    Million_20180925_2137.ts

    Live pause does work.

    This might be a clue

    https://www.google.co.uk/search?q=Foxsat-HDR+failed+recordings+no+.+nts+file&rlz=1C1CHBH_en-GBGB744GB744&oq=Foxsat-HDR+failed+recordings+no+.+nts+file&aqs=chrome..69i57.25572j0j8&sourceid=chrome&ie=UTF-8

    How many cables do you have connected ?. Suspect a issue with the second feed from your lnb if you have two. Once you confirm two I will come up with a couple of tests to confirm two good lnb feeds.

    Can you confirm you are using an English Postcode during set up ?

    | Thu 27 Sep 2018 20:17:41 #8 |
  9. User has not uploaded an avatar

    RobJF

    member
    Joined: Apr '14
    Posts: 43

    offline

    Two cables, Scottish postcode.

    | Fri 28 Sep 2018 5:06:01 #9 |
  10. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    RobJF - 4 hours ago  » 
    Two cables, Scottish postcode.

    Tune to 973 BBC 1 Scotland HD start a recording. Enter 304 to move to view Movies4 Men, start a second recording. Enter 957 check you can view BBC 1 NI.

    Tuner 1 using Low Band Horizontal. Tuner 2 now using Low Band Vertical.

    Only possible if 2nd cable is connected to a working lnb.

    | Fri 28 Sep 2018 9:31:16 #10 |

RSS feed for this topic

Reply »

You must log in to post.