My Humax Forum » Freesat HD » HB 1000S, 1100S

Remote control lights

(1 post)
  1. User has not uploaded an avatar

    stevep1951

    new member
    Joined: Nov '22
    Posts: 1

    offline

    My remote control stopped working. It would often ‘go slow’ in that one would have to hold buttons in for some time before the light (on the remote) illuminated and it actuated the function on the box (Humax 1000S). Then it stopped working altogether, light would not come on and no instruction sent to the box.

    Replaced batteries – no difference – light would not come on and no instruction sent to the box.

    Bought new remote – no difference – light would not come on and no instruction sent to the box.

    It seems odd that with both old and new remotes, both with new batteries, not only would they not control the box, but the light on the remotes would not even come on when buttons were pressed. Does this indicate that the light is actually a response to signal from the box, and that the box itself is faulty?

    I have tried (on both remotes) holding 0 and O.K. down for 30 seconds.

    | Tue 22 Nov 2022 19:42:56 #1 |

RSS feed for this topic

Reply

You must log in to post.