The TV guide is not showing English but instead what can only be described as gobbledygook. Have also a PVR-9150T which has the same problem. The same text is shown on the channel programme description.
My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T
TV guide not showing english
(11 posts)-
| Sun 17 Mar 2019 9:32:46 #1 |
-
Tv transmitter is Huntshaw Cross.
| Sun 17 Mar 2019 15:26:04 #3 | -
It is an odd problem and I am not sure about the solution. I would start by putting the boxes into standby waiting until the hard drive has stopped spinning and then turn off the power at the mains for 30 seconds. See if they are any better. If not do a reset to default settings.
| Sun 17 Mar 2019 16:54:34 #4 | -
I'm having the exact same problem. I, too, am on the Huntshaw Cross transmitter. I have tried powering off from the wall but it was still the same. I will try resetting to default settings.
| Sun 17 Mar 2019 17:20:16 #5 | -
Restoring to default settings didn't work. Any more ideas? This is really annoying!
| Sun 17 Mar 2019 17:28:21 #6 | -
I also reset to default, tried a different language all showing no correction to the problem.
| Sun 17 Mar 2019 18:40:54 #7 | -
I have a feeling I saw another thread about this somewhere, perhaps on AV Forums or Digital Spy, but I cannot find it now. I think there may have been a Huntshaw Cross reference there.
| Sun 17 Mar 2019 19:08:15 #8 | -
The issue seems to be with Huntshaw Cross transmitter, not the Humax. My Freeview TV is doing the same.
| Sun 17 Mar 2019 19:37:32 #9 | -
A1944 - 2 days ago »
I have a feeling I saw another thread about this somewhere, perhaps on AV Forums or Digital Spy, but I cannot find it now. I think there may have been a Huntshaw Cross reference there.Yes, I have just come across it again. It is in the Topfield (Toppy) forum here:
https://forum.toppy.org.uk/forum/viewtopic.php?t=21273
If that is not your case, JC, then there may be something there to assist.
| Tue 19 Mar 2019 22:55:38 #10 |
Reply »
You must log in to post.
