Hello, newbie here. I have a humax HDR 1000S with a HDMI output, but an old tv with only a coaxial input. Is there any way that I can use this tv with this humax?
My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S
coax only tv
(10 posts)-
| Fri 23 Jan 2015 16:48:32 #1 |
-
Yes, connect a TV Modulator to the box scart socket.
| Fri 23 Jan 2015 17:02:33 #2 | -
Thank you very much for your full reply to my question Much appreciated.
| Mon 26 Jan 2015 12:31:54 #3 | -
I have received the modulator recommended today, but there doesn't seem to be any common connector between it and the humax box - no scart on the humax and no hdmi on the modulator.
| Thu 29 Jan 2015 18:12:55 #4 | -
Speaking as an owner of the HDR1000S, there is definitely a SCART on that box as I am using it for a RF modulator. So what box do you have?
| Thu 29 Jan 2015 18:34:03 #5 | -
Franb - 44 minutes ago »
I have received the modulator recommended today, but there doesn't seem to be any common connector between it and the humax box - no scart on the humax and no hdmi on the modulator.Picture of rear here, Scart socket under the composite video (yellow) and analogue audio (red/white) rca phono connections. These can also be used with a modulator.
http://www.joinfreesat.co.uk/review-humax-hdr-1000s-freesat-hd-free-time-receiver/
| Thu 29 Jan 2015 18:58:52 #6 | -
Apologies, my error, swapped my new HDR 1000S for an existing box, so gave you the wrong box ID. Guess, I'll just swap them back, unless there is a solution to connecting this HB 1000S to this old coax only tv?
| Fri 30 Jan 2015 10:54:22 #7 | -
Why not use the analogue audio (red/white) rca phono connections on the rear - they can connect to the modulator?
http://www.bing.com/images/search?q=HB+1000S+rear&id=D608A80746D6E8233B16D9C105B53D6A50BAA9B1&FORM=IQFRBA#view=detail&id=C0B39D7C731A1DCCB435A2C3A4883B19F3C06600&selectedIndex=1| Fri 30 Jan 2015 11:09:21 #8 | -
Oh, ok, I didn't realise that you could use the phono leads for video - thought they were just audio! Much appreciate all your help. All is now working fine, thank you.
| Sat 31 Jan 2015 11:21:31 #10 |
Reply
You must log in to post.