My Humax Forum » Freeview HD » FVP 4000T, 5000T

EPG info for BBC1 HD missing

(29 posts)
  1. User has not uploaded an avatar

    A1944

    special member
    Joined: Dec '17
    Posts: 1,003

    offline

    As far as I am aware, the London update is already completed.

    | Mon 10 Apr 2023 23:28:44 #11 |
  2. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,684

    online

    A1944 - 16 mins ago  » 
    As far as I am aware, the London update is already completed.

    I found an article that suggests the following regions will be updated on or about 26th April:

    North East and Cumbria
    North West
    West
    South West
    South (including Oxford)
    East (including Cambridge)
    South East

    | Mon 10 Apr 2023 23:46:12 #12 |
  3. User has not uploaded an avatar

    chrissiegibson

    new member
    Joined: May '23
    Posts: 3

    offline

    Hi,
    I had the same problem but found that BBC1HD NorthWest is now on channel 837. I discovered this by going on BBC1 and clicking ok when the Watch in HD sign came up.
    Is there anyway I can get that back to 101 on my EPG. My transmitter is Winter Hill?
    Thanks

    | Tue 9 May 2023 9:49:00 #13 |
  4. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,684

    online

    chrissiegibson - 20 mins ago  » 
    Is there anyway I can get that back to 101 on my EPG. My transmitter is Winter Hill?

    An automatic tune with the "Smart tune" option off (this will delete your schedule of future recordings) should resolve the problem.

    | Tue 9 May 2023 10:11:53 #14 |
  5. User has not uploaded an avatar

    chrissiegibson

    new member
    Joined: May '23
    Posts: 3

    offline

    Hi, thanks. I've tried that but I still get the message No programme information available. It's since we've got the regional programmes in HD.
    Any other thoughts?

    | Tue 9 May 2023 10:14:07 #15 |
  6. User has not uploaded an avatar

    Po51uhd

    new member
    Joined: May '23
    Posts: 3

    offline

    My local BBC 1 HD is now on channel 814. (BBC1 North-West)

    Is there any way of editing the numerically-ordered channel list in the epg so that I can move 814 to just above 102 (where the BBC1 HD used to be before all this regional HD malarkey?

    Thanks

    | Tue 9 May 2023 13:26:34 #16 |
  7. User has not uploaded an avatar

    jdlfreetime

    special member
    Joined: Dec '13
    Posts: 372

    offline

    Po51uhd - 16 mins ago  » 
    My local BBC 1 HD is now on channel 814. (BBC1 North-West)
    Is there any way of editing the numerically-ordered channel list in the epg so that I can move 814 to just above 102 (where the BBC1 HD used to be before all this regional HD malarkey?
    Thanks

    Hi there,

    Which Humax model do you have? Have you tried doing a full retune? John L

    | Tue 9 May 2023 13:43:32 #17 |
  8. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,684

    online

    chrissiegibson - 3 hours ago  » 
    Hi, thanks. I've tried that but I still get the message No programme information available. It's since we've got the regional programmes in HD.
    Any other thoughts?

    Have you power cycled the box ? (ie put the box in standby, wait for the hard drive to stop spinning, turn off the electrical supply, wait for 30 seconds and then turn on the power again).

    | Tue 9 May 2023 13:47:31 #18 |
  9. User has not uploaded an avatar

    meadfoot

    member
    Joined: Dec '18
    Posts: 38

    offline

    I've always found it best when they are moving Muxes etc to delete the relevant channels first before doing the rescan

    | Tue 9 May 2023 15:02:08 #19 |
  10. User has not uploaded an avatar

    meadfoot

    member
    Joined: Dec '18
    Posts: 38

    offline

    I've always found it best when they are moving Muxes etc to delete the relevant channels first before doing the rescan

    | Tue 9 May 2023 15:02:51 #20 |

RSS feed for this topic

Reply »

You must log in to post.