My Humax Forum » Freeview HD » HDR FOX T2

HDR T2 Wrong System ID

(10 posts)
  1. User has not uploaded an avatar

    junkmanukuk

    junior member
    Joined: Jun '22
    Posts: 5

    offline

    Hi

    Ive just bought a HDR T2 from ebay

    Im trying to install the firmware as it has a few problems hoping to fix them but i always get E-Id Error

    I found out that the system id is wrong its 000000A0 and was wondering how can i fix it to give it the right system id 80BC.7E00

    Any help would be great

    Thanks

    Does anyone know how to fix it

    Ive attached a couple of pics showing System Info and the Error

    Thanks

    Attachments

    1. PXL_20220624_194231445.jpg (147.3 KB, 1 downloads) 1 year old
    2. PXL_20220624_190508036.jpg (153.7 KB, 0 downloads) 1 year old
    | Fri 24 Jun 2022 23:47:13 #1 |
  2. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 10,986

    offline

    Welcome to our Forum

    Please check your Private Messages for a link to a file that might help.

    | Sat 25 Jun 2022 8:48:19 #2 |
  3. User has not uploaded an avatar

    junkmanukuk

    junior member
    Joined: Jun '22
    Posts: 5

    offline

    Thanks Barry ive sent u a PM

    | Sat 25 Jun 2022 9:14:45 #3 |
  4. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 10,986

    offline

    junkmanukuk - 9 mins ago  » 
    Thanks Barry ive sent u a PM

    Responded to your message.

    | Sat 25 Jun 2022 9:24:30 #4 |
  5. User has not uploaded an avatar

    junkmanukuk

    junior member
    Joined: Jun '22
    Posts: 5

    offline

    Thanks Barry

    Just done it and the System id has changed to 80BC.7E00 its worked

    Your a star many thanks

    Just a update i reinstalled the firmware that i hoped might have sorted the problem out that when turning it on it wont display a picture and would say on the TV NO Signal and enter some kind of boot loop also the hard drive would spin for a few seconds then stop and the only way i can get it to work is to unplug it for a while then plug it back in then it boots up as normal

    Anyone else had this problem?

    I think i bought a lemon

    | Sat 25 Jun 2022 10:01:28 #5 |
  6. User has not uploaded an avatar

    dave321

    new member
    Joined: Feb '23
    Posts: 2

    offline

    Hi
    I am trying to upgrade my HDR Fox T2 to the latest firmware and I have the same E-ID error as described in this post.
    Apart from the MAC address, everything in my system is identical to the two pictures posted.
    Please could someone provide the file/instructions which will allow me to reset the system id from 0000.00A0 to 80BC.7E00 so that I can update the firmware.
    Thanks
    Dave

    | Tue 14 Feb 2023 20:39:53 #6 |
  7. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 10,986

    offline

    Hi Dave - Welcome to our Forum

    Check your private messages.

    | Wed 15 Feb 2023 7:51:43 #7 |
  8. User has not uploaded an avatar

    dave321

    new member
    Joined: Feb '23
    Posts: 2

    offline

    Thanks Barry
    The file in the PM worked and the system ID is now correct.
    Dave

    | Wed 15 Feb 2023 14:22:45 #8 |
  9. Barry

    Barry

    senior admin
    Joined: Feb '11
    Posts: 10,986

    offline

    Good news

    | Wed 15 Feb 2023 14:55:34 #9 |
  10. User has not uploaded an avatar

    Jon F

    new member
    Joined: Dec '23
    Posts: 1

    offline


    | Thu 28 Dec 2023 18:46:58 #10 |

RSS feed for this topic

Reply

You must log in to post.