My Humax Forum » Freesat HD » HDR 1000, 1010, 1100S

Humax HDR-1100S No network connection

(5 posts)
  1. User has not uploaded an avatar

    Lynton

    new member
    Joined: Feb '17
    Posts: 3

    offline

    Hi,hope someone can help. My box is 3 years old and was working fine.
    Two days ago it failed to connect to my network. I have done all the usual things, checked cables, other things on network are working, powered down,
    reset to manufactorers settings, checked by changing to a new network lead.
    Any help much appreciated. Hope i dont have to replace box.

    | Thu 2 Apr 2020 11:22:00 #1 |
  2. REPASSAC

    REPASSAC

    special member
    Joined: Mar '11
    Posts: 4,100

    offline

    How is the HDR-11100S connected to the network?
    Have you tried rebooting your router and when the reboot has fully finished the HDR-1100S?
    Is the Green light next to the network socket on?
    Does it have a network address in System settings?

    | Thu 2 Apr 2020 11:40:26 #2 |
  3. User has not uploaded an avatar

    Lynton

    new member
    Joined: Feb '17
    Posts: 3

    offline

    Hi,the box is connected by DSL Router with a yellow lead.
    Yes i have rebooted the router then the box.
    Yes the green light is on.
    Yes it does have a network address in system settings.
    Thank you.

    | Thu 2 Apr 2020 11:57:39 #3 |
  4. User has not uploaded an avatar

    Martin Liddle

    special member
    Joined: Feb '11
    Posts: 4,618

    offline

    Lynton - 54 mins ago  » 
    Yes it does have a network address in system settings.

    Can you tell us all the network information (IP Address, Netmask, Gateway, DNS) please?

    | Thu 2 Apr 2020 12:53:40 #4 |
  5. User has not uploaded an avatar

    Lynton

    new member
    Joined: Feb '17
    Posts: 3

    offline

    Hi again, the problem was the router, i unplugged the box again, reset the router and plugged the box back in. Working spot on now.
    THANK YOU.

    | Thu 2 Apr 2020 15:06:21 #5 |

RSS feed for this topic

Reply

You must log in to post.