Hello , I am new to the forum and a working service engineer.
we have a few pvr 9200t that have lost the tuning after doing the update on the Humax site 1.00.26.
has any body got the old software that was working that was the 1.00.23 I can try please.
My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T
humax pvr 9200t old software
(16 posts)-
| Tue 31 Dec 2019 11:17:48 #1 |
-
There is a working link via post
https://myhumax.org/forum/topic/sw-updates-for-humax-box-1#post-50021
You don't have to have dropbox account to download although it will try to encourage you to set one up. I've just downloaded without a dropbox account and compared a copy I had from Humax years ago with the freshly downloaded copy and they are identical (checked via SH1).I don't believe that there has been a 1.00.26 for the 9200T. The Humax site I think you are referring to only has 1.00.26 for the 9300T and the 9150T. There are some hardware differences which if you tried to use one of those would account for a 9200T not fully working when loaded with the 1.00.26 version for the other two models in the series.
| Tue 31 Dec 2019 12:50:23 #2 | -
middz - 1 hour ago »
Hello , I am new to the forum and a working service engineer.
we have a few pvr 9200t that have lost the tuning after doing the update on the Humax site 1.00.26.Whereabouts in the country are you? There have been reception problems due to unusual atmospheric conditions which might account for the problem. I wasn't aware of the 1.00.26 software version; where did you download it from?
has any body got the old software that was working that was the 1.00.23 I can try please.
I will have a copy somewhere; send me a Private Message with your email address and I will send it to you.
| Tue 31 Dec 2019 12:53:00 #3 | -
Luke - 3 mins ago »
I don't believe that there has been a 1.00.26 for the 9200T. The Humax site I think you are referring to only has 1.00.26 for the 9300T and the 9150T. There are some hardware differences which if you tried to use one of those would account for a 9200T not fully working when loaded with the 1.00.26 version for the other two models in the series.I am very confident that 1.00.26 for a 9150T or 9300T would not be installed unless the file had been modified to match the expected signature for a 9200T (I know how to do it but I have been very careful not to publish the information) and if it has been loaded then the box would be bricked rather than unable to tune.
| Tue 31 Dec 2019 12:57:28 #4 | -
Martin Liddle - 7 mins ago »
I will have a copy somewhere; send me a Private Message with your email address and I will send it to you.I thought the dropbox link I supplied in the previous post was yours as you originally posted it!
Martin Liddle - 4 mins ago »
I am very confident that 1.00.26 for a 9150T or 9300T would not be installed unless the file had been modified to match the expected signature for a 9200TYes I agree. But i was taking it that middz had somehow updated to a 1.00.26.
@Middz, are you sure that the 9200Ts aren't still on 1.00.23?
| Tue 31 Dec 2019 13:03:41 #5 | -
Hi Sorry about this
the humax units are PVR-9300t (my mistake sorry )
we have 3 in that were working ok till they got to update 1.00.26 from the humax site .
they were on 1.00.23 and tuned in no problem.
has anybody got the old 1.00.23 firmware i can try please.on another note we have in a PVR-9300T that is on 1.00.27 this tunes in ok but i cant find that version on the Humax site ?
| Thu 2 Jan 2020 15:35:05 #6 | -
I have a vague feeling that 1.00.27 appeared on very late production machines, but was never released as an upgrade...or am I dreaming?
| Thu 2 Jan 2020 17:47:54 #8 | -
1.00.26 is a very old, though current, version for the 9300T. We still have one as a backup PVR (though rarely used now) and have had no problems with 1.00.26 despite it being updated in 2011.
| Thu 2 Jan 2020 18:02:49 #9 |
Reply »
You must log in to post.
