My Humax Forum

• Home
• LOGIN
• Register
• Search
on Amazon

My Humax Forum » Freeview SD » PVR 9150T, 9200T, 9300T

11. 

    Biggles
    

    special member
    Joined: Apr '11
    Posts: 619

    offline

    bmax - 3 mins ago  » 
    I have a vague feeling that 1.00.27 appeared on very late production machines, but was never released as an upgrade...or am I dreaming?

    Many moons ago there were 'behind the scenes' attempts to cure the consecutive recording problem on the 9150/9300 machines, this resulted in software version 28 (and maybe 27) but as you say bmax I'm fairly sure these versions were never released to the general public. Version 28 certainly didn't cure the consecutive recording problem but my partner's 9300 has been running on version 28 since 2013 without any further problems so I've left it on 28.

    | Thu 2 Jan 2020 18:10:26 #11 |
12. 

    Biggles
    

    special member
    Joined: Apr '11
    Posts: 619

    offline

    middz - 2 hours ago  » 
    Hi Sorry about this
    the humax units are PVR-9300t (my mistake sorry )
    we have 3 in that were working ok till they got to update 1.00.26 from the humax site .
    they were on 1.00.23 and tuned in no problem.
    has anybody got the old 1.00.23 firmware i can try please.
    on another note we have in a PVR-9300T that is on 1.00.27 this tunes in ok but i cant find that version on the Humax site ?

    I'm puzzled why you can't tune the machines using software version 26, there must be loads of 9300 still in use and running version 26. If there is a problem with version 26 tuning this forum would have been full of it back in the day.

    | Thu 2 Jan 2020 18:18:17 #12 |
13. 

    Luke
    

    special member
    Joined: Apr '11
    Posts: 1,499

    offline

    Biggles - 6 hours ago  » 
    I'm puzzled why you can't tune the machines using software version 26, there must be loads of 9300 still in use and running version 26. If there is a problem with version 26 tuning this forum would have been full of it back in the day.

    Thee were a few threads on various sites including the following:
    https://myhumax.org/forum/topic/9300t-no-channels-found-after-firmware-update#post-44521

    | Fri 3 Jan 2020 0:43:30 #13 |
14. 

    bmax
    

    senior member
    Joined: Mar '11
    Posts: 51

    offline

    has any body got the old software that was working that was the 1.00.23 I can try please.

    If you are still stuck, I have a copy of version 23. If you want it please send me a PM with your e-mail address.

    | Fri 3 Jan 2020 9:25:17 #14 |
15. 

    Biggles
    

    special member
    Joined: Apr '11
    Posts: 619

    offline

    Luke - 9 hours ago  » 

    Biggles - 6 hours ago  » 
    I'm puzzled why you can't tune the machines using software version 26, there must be loads of 9300 still in use and running version 26. If there is a problem with version 26 tuning this forum would have been full of it back in the day.

    Thee were a few threads on various sites including the following:
    https://myhumax.org/forum/topic/9300t-no-channels-found-after-firmware-update#post-44521

    Interesting, I'd totally forgotten that. No resolution or conclusion though so we're still in the dark. I have a friend with a 9300 running v26, I'll check his loader version.

    | Fri 3 Jan 2020 10:16:04 #15 |
16. 

    Biggles
    

    special member
    Joined: Apr '11
    Posts: 619

    offline

    Interesting, I'd totally forgotten that. No resolution or conclusion though so we're still in the dark. I have a friend with a 9300 running v26, I'll check his loader version.

    My friend's 9300 has v26 software, a4.38 loader and he tells me he can manually tune it.

    | Fri 3 Jan 2020 14:51:26 #16 |

RSS feed for this topic

Reply

You must log in to post.