My Humax Forum » Freeview HD » FVP 4000T, 5000T

No signal to TV when 5000 is powered on

(25 posts)
  1. User has not uploaded an avatar

    giskard

    member
    Joined: Jan '18
    Posts: 33

    offline

    My Samsung telly loses TV signal when my Humax 5000T is powered on - switching off the 5000T restores the TV signal. If there was no signal with the PVR switched off then I'd understand, though I have eco-mode switched off in the 5000's settings.

    Can anyone explain why this is happening? My 5000T was purchased with the latest firmware already installed.

    | Sat 27 Jan 2018 15:46:03 #1 |
  2. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    Turn off CEC control on the TV. If that doesn't fix move the 5000T to a different HDMI port on the TV.

    | Sat 27 Jan 2018 18:30:23 #2 |
  3. User has not uploaded an avatar

    A1944

    special member
    Joined: Dec '17
    Posts: 1,003

    offline

    Maybe once the Humax is on there is interference from the HDMI cable into the TV's aerial cable. Try moving them as far apart as you can.

    | Sat 27 Jan 2018 23:04:51 #3 |
  4. User has not uploaded an avatar

    giskard

    member
    Joined: Jan '18
    Posts: 33

    offline

    A1944 - 1 day ago  » 
    Maybe once the Humax is on there is interference from the HDMI cable into the TV's aerial cable. Try moving them as far apart as you can.

    Did that and it seems to have made a difference. Time to replace the HDMI cable I think.

    | Sun 28 Jan 2018 23:31:34 #4 |
  5. User has not uploaded an avatar

    james1089

    new member
    Joined: Feb '18
    Posts: 1

    offline

    Same for me turn on box, switches on TV automatically no signal. Turn off then on again work's perfectly. Hisense tv

    | Sat 10 Feb 2018 16:18:35 #5 |
  6. User has not uploaded an avatar

    giskard

    member
    Joined: Jan '18
    Posts: 33

    offline

    giskard - 4 weeks ago  » 

    A1944 - 1 day ago  » 
    Maybe once the Humax is on there is interference from the HDMI cable into the TV's aerial cable. Try moving them as far apart as you can.

    Did that and it seems to have made a difference. Time to replace the HDMI cable I think.

    HDMI cable replaced and moved as far away from aerial lead as possible, but it's still an issue although now it's intermittent when the Humax is powered on.

    Could my FVP-5000 be faulty? Surely it shouldn't be generating so much interference that it affects the TV signal?

    | Tue 27 Feb 2018 22:02:30 #6 |
  7. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    giskard - 13 hours ago  » 

    giskard - 4 weeks ago  » 

    A1944 - 1 day ago  » 
    Maybe once the Humax is on there is interference from the HDMI cable into the TV's aerial cable. Try moving them as far apart as you can.

    Did that and it seems to have made a difference. Time to replace the HDMI cable I think.

    HDMI cable replaced and moved as far away from aerial lead as possible, but it's still an issue although now it's intermittent when the Humax is powered on.
    Could my FVP-5000 be faulty? Surely it shouldn't be generating so much interference that it affects the TV signal?

    HDMI cables generate RF in the UHF band, it's nothing to do with the box. If you have cheap poorly screened coax interconnects it can knock out terrestrial TV. Make your own coax interconnects using double screened satellite grade cable.

    I use screw on f connectors and belling lee converters as needed.

    https://www.screwfix.com/p/labgear-pf100-satellite-coaxial-cable-25m-black/58592

    https://www.screwfix.com/p/philex-coaxial-f-plug-pack-of-10/17061

    https://www.screwfix.com/p/labgear-f-to-coax-plugs-pack-of-10/39772

    https://www.screwfix.com/p/labgear-f-to-coax-adaptors-pack-of-10/33532

    https://www.youtube.com/watch?v=jjMiCgyeFm4

    | Wed 28 Feb 2018 11:50:29 #7 |
  8. User has not uploaded an avatar

    giskard

    member
    Joined: Jan '18
    Posts: 33

    offline

    grahamlthompson - 5 months ago  » 

    giskard - 13 hours ago  » 

    giskard - 4 weeks ago  » 

    A1944 - 1 day ago  » 
    Maybe once the Humax is on there is interference from the HDMI cable into the TV's aerial cable. Try moving them as far apart as you can.

    Did that and it seems to have made a difference. Time to replace the HDMI cable I think.

    HDMI cable replaced and moved as far away from aerial lead as possible, but it's still an issue although now it's intermittent when the Humax is powered on.
    Could my FVP-5000 be faulty? Surely it shouldn't be generating so much interference that it affects the TV signal?

    HDMI cables generate RF in the UHF band, it's nothing to do with the box. If you have cheap poorly screened coax interconnects it can knock out terrestrial TV. Make your own coax interconnects using double screened satellite grade cable.
    I use screw on f connectors and belling lee converters as needed.
    https://www.screwfix.com/p/labgear-pf100-satellite-coaxial-cable-25m-black/58592
    https://www.screwfix.com/p/philex-coaxial-f-plug-pack-of-10/17061
    https://www.screwfix.com/p/labgear-f-to-coax-plugs-pack-of-10/39772
    https://www.screwfix.com/p/labgear-f-to-coax-adaptors-pack-of-10/33532
    https://www.youtube.com/watch?v=jjMiCgyeFm4

    Thanks for that, very useful.

    So I should use double-screened co-ax between my aerial point and the Humax, and from the Humax to the TV?

    | Fri 24 Aug 2018 10:50:55 #8 |
  9. grahamlthompson

    grahamlthompson

    special member
    Joined: Feb '11
    Posts: 14,442

    offline

    giskard - 23 minutes ago  » 

    grahamlthompson - 5 months ago  » 

    giskard - 13 hours ago  » 

    giskard - 4 weeks ago  » 

    A1944 - 1 day ago  » 
    Maybe once the Humax is on there is interference from the HDMI cable into the TV's aerial cable. Try moving them as far apart as you can.

    Did that and it seems to have made a difference. Time to replace the HDMI cable I think.

    HDMI cable replaced and moved as far away from aerial lead as possible, but it's still an issue although now it's intermittent when the Humax is powered on.
    Could my FVP-5000 be faulty? Surely it shouldn't be generating so much interference that it affects the TV signal?

    HDMI cables generate RF in the UHF band, it's nothing to do with the box. If you have cheap poorly screened coax interconnects it can knock out terrestrial TV. Make your own coax interconnects using double screened satellite grade cable.
    I use screw on f connectors and belling lee converters as needed.
    https://www.screwfix.com/p/labgear-pf100-satellite-coaxial-cable-25m-black/58592
    https://www.screwfix.com/p/philex-coaxial-f-plug-pack-of-10/17061
    https://www.screwfix.com/p/labgear-f-to-coax-plugs-pack-of-10/39772
    https://www.screwfix.com/p/labgear-f-to-coax-adaptors-pack-of-10/33532
    https://www.youtube.com/watch?v=jjMiCgyeFm4

    Thanks for that, very useful.
    So I should use double-screened co-ax between my aerial point and the Humax, and from the Humax to the TV?

    Yes it can avoid interference from HDMI interconnects which radiate radio frequency interference in the same band (uhf) as terrestrial TV as described above. However I would use a splitter to give the TV and Humax box a seperate feed. That way you can turn on power saving in sby mode.

    https://www.screwfix.com/p/labgear-2-way-splitter-with-power-pass-all-ports/99105

    | Fri 24 Aug 2018 11:19:02 #9 |
  10. User has not uploaded an avatar

    JohnH77

    special member
    Joined: Dec '15
    Posts: 510

    offline

    Traditional "brown TV coax with copper braid" is virtually useless for Freeview signals. Analogue TV signals were very tolerant to interference - remember those pictures which were more snow than picture?? - but digital is much more sensitive.

    Traditional TV coax is useless because the braid is so open it lets all sorts of interference through.

    Use satellite grade coax with a braid AND a solid metal foil sheath.

    | Fri 24 Aug 2018 13:16:13 #10 |

RSS feed for this topic

Reply »

You must log in to post.